Effects

Here you can apply special effects to the sound.

Effect on/off

Use the ON/OFF buttons of the Effects section to switch each effect on/off.

fig.4-01

[COMP]:

Compressor

[MFX 1]:

Multi-effects 1

[MFX 2]:

Multi-effects 2

[REVERB]:

Reverb

Effect settings

1.In the top screen of each mode, press [F4 (Effects)].

2.Press [F1]–[F5] to select an effect to adjust.

[F1

(Routing)]

Specify the connections (routing) between

 

 

parts, effects, and output destinations.

[F2

(Comp/EQ)]

Compressor settings.

[F3

(MFX 1)]

Multi-effects 1 settings.

[F4

(MFX 2)]

Multi-effects 2 settings.

[F5

(Reverb)]

Reverb settings.

3.Use [CURSOR] to select a parameter.

4.Use [VALUE] or [INC/DEC] to make settings.

Effect connection (Effect Routing)

You can specify the connections independently for each pattern. The way in which the direct sound is output (2) and the depth of reverb (3) can be set independently for each part.

fig.4-02

1

6

7

2

4

8

910

5

3

11

Parameter

Range

Explanation

 

 

 

1.

1–16, EXT

The part for which you are

Part Number

 

making effect settings.

 

 

EXT: External input

2.

DRY, MFX1,

How the original sound of

Part Output

MFX2,

each part will be output

Assign

COMP, DIR1,

DRY: Output to MIX OUT-

 

DIR2, RHY

PUT jacks without passing

 

 

through effects

 

 

MFX1 (2): Output through

 

 

multi-effects 1 (or 2)

 

 

COMP: Output through the

 

 

compressor

 

 

DIR1 (2): Output to the DI-

 

 

RECT 1 (or DIRECT 2) jacks

 

 

without passing through ef-

 

 

fects

 

 

RHY: Output according to

 

 

the settings of the rhythm

 

 

set assigned to the part

 

 

* “RHY” can be set only

 

 

when a rhythm set is as-

 

 

signed to the part.

3.

0–127

Depth of reverb applied to

Part Reverb

 

each part

Send Level

 

Set this to 0 if you don’t

 

 

want to apply reverb.

4.

(see explana-

Output destination of the

Comp Output

tion)

sound processed through the

Assign

 

compressor.

 

 

DRY: MIX OUTPUT jacks

 

 

MFX1 (2): Multi-effects 1

 

 

(or 2 )

5.

0–127

Depth of reverb applied to the

Comp Reverb

 

sound processed through the

Send Level

 

compressor

 

 

Set this to 0 if you don’t

 

 

want to apply reverb.

6.

See “Multi-Ef-

The effect used by multi-ef-

(MFX Type)

fects List” (p.

fects 1

 

92)

* For details on each effect,

 

 

refer to “Multi-Effects List”

 

 

(p. 92).

88

Page 88
Image 88
Roland MC-909 owner manual Effect on/off, Effect settings, Effect connection Effect Routing, 910