Roland MC-909 Time Control Delay MFX2 only, Multi-Effects List Time Skip Delay MFX2 only, 107

46: TIME CONTROL DELAY (MFX2 only)

This lets you smoothly vary the delay time. As the delay time is varied, the pitch will change correspondingly; lengthening the delay time will lower the pitch, and shortening it will raise the pitch.

fig.MFX46

L in				2-Band	L out
		Balance D		EQ
				Balance W
	Time Control Delay			Balance W
	Feedback
R in				2-Band	R out
		Balance D		EQ
Parameter	Value		Description
Delay #1	0–4000 ms,		Adjusts the time until the delay is
	note		heard.
Feedback	-98– +98 %		Adjusts the amount of the delay
#2			that’s fed back into the effect. Nega-
			tive (-) settings invert the phase.
Accelera-	0–15		Adjusts the time over which the De-
tion			lay Time changes from the current
			setting to a specified new setting.
			The rate of change for the Delay
			Time directly affects the rate of
			pitch change.
HF Damp	200–8000		Adjusts the frequency above which
	Hz, BY-		sound fed back to the effect is fil-
	PASS		tered out. If you do not want to filter
			out any high frequencies, set this
			parameter to BYPASS.
Pan	L64–63R		Stereo location of the delay
Low Gain	-15– +15 dB		Gain of the low frequency range
High Gain	-15– +15 dB		Gain of the high frequency range
Balance	D100:0W–		Volume balance between the direct
	D0:100W		sound (D) and the delay sound (W)
Level	0–127		Output level

Multi-Effects List

47: TIME SKIP DELAY (MFX2 only)

A delay that changes the delay time in stair-step fashion.

fig.MFX47

L in				2-Band	L out
		Balance D		EQ
				Balance W
	Time Skip Delay			Balance W
	Feedback
R in				2-Band	R out
		Balance D		EQ
Parameter	Value		Description
Delay #1	0–4000 ms,		Adjusts the time until the delay is
	note		heard.
Skip Rate	0.05–10.0		Frequency at which the delay time
	Hz, note		will change
Feedback	-98– +98 %		Adjusts the amount of the delay
#2			sound that’s fed back into the effect.
			Negative (-) settings invert the
			phase.
Accelera-	0–15		Adjusts the time over which the De-
tion			lay Time changes from the current
			setting to its specified new setting.
HF Damp	200–8000		Adjusts the frequency above which
	Hz, BY-		sound fed back to the effect is fil-
	PASS		tered out. If you don’t want to filter
			out any high frequencies, set this
			parameter to BYPASS.
Pan	L64–63R		Stereo location of the delay			Effects
Low Gain	-15– +15 dB		Gain of the low frequency range
High Gain	-15– +15 dB		Gain of the high frequency range
Balance	D100:0W–		Volume balance between the direct
	D0:100W		sound (D) and the delay sound (W)
Level	0–127		Output level

note:

fig.notelist2.e

(Sixty-fourth-note triplet),				(Sixty-fourth note),				(Thirty-second-note triplet),
(Thirty-second note),			(Sixteenth-note triplet),					(Dotted thirty-second note),
(Sixteenth note),		(Eighth-note triplet),					(Dotted sixteenth note),
(Eighth note),	(Quarter-note triplet),				(Dotted eighth note),
(Quarter note),	(Half-note triplet),				(Dotted quarter note),				(Half note),
(Whole-note triplet),			(Dotted half note),			(Whole note),
(Double-note triplet),			(Dotted whole note),					(Double note)

107