Roland MC-909 owner manual Saving a Patch/Rhythm Set, Press Enter or F2 Patch

Saving a Patch/Rhythm Set

Patch/rhythm set settings that you edit will be lost if you re-select the patch/rhythm set or turn off the power. If you want to keep your edits, you must use the following procedure to save the data.

1.Press [WRITE].

The Write menu screen will appear.

Make sure that “Patch/Rhythm” is highlighted.

fig.2-50

2.Press [ENTER] or [F2 (Patch)].

The patch name/rhythm set name entry screen will appear.

fig.2-51

3.Assign a name to the patch/rhythm set.

[CURSOR (left/right)]	Moves the cursor (the location at which
	to enter/edit a character).
[CURSOR (up/down)]	Switches letters between uppercase
	and lowercase.
[VALUE] [INC/DEC]	Selects characters.
[F1 (Change Type)]	Selects the type of character.
	Each time you press this, you will al-
	ternately select the first character of
	the uppercase alphabet (A), lower-
	case alphabet (a), or numerals and
	symbols (0).
[F2 (Delete)]	Deletes the character at the cursor loca-
	tion, while shifting the following char-
	acters to the left, closing the gap.
[F3 (Insert)]	Inserts a space at the cursor location.

*If you decide not to enter the name, press [F5 (Cancel)].

4.When you have finished entering the name, press [F6 (Write)].

A screen in which you can select the write-destination patch/

rhythm set will appear.

fig.2-52

Patch/Sample Mode

5.Use [VALUE] or [INC/DEC] to select the write- destination patch/rhythm set.

Use [CURSOR (left/right)] to select the bank (user, card).

6.Press [F6 (Write)].

A message will ask you to confirm that you want to write the data.

7.To write the data, press [F6 (Execute)].

*If you decide to cancel, press [F5 (Cancel)].

77