Roland MC-909 Multi-Effects List Multi TAP Delay MFX2 only, Reverse Delay MFX2 only, 106

Multi-Effects List

43: MULTI TAP DELAY (MFX2 only)

This effect provides four delays. Each of the Delay Time parameters can be set to a note length based on the selected tempo. You can also set the panning and level of each delay sound.

fig.MFX43

		Balance D
L in			2-Band	L out
			EQ
Feed	Delay 1
back	Delay 3	Balance W
	Multi Tap Delay
	Delay 4		Balance W
	Delay 2		2-Band
R in				R out
		Balance D	EQ

Parameter	Value	Description
Delay 1–4	0–4000 ms,	Adjusts the time until Delays 1–4
	note	are heard.
Pan 1–4	L64–63R	Stereo location of Delays 1–4
Level 1–4	0–127	Output level of Delays 1–4
Feedback	-98– +98 %	Adjusts the amount of the delay
#1		sound that’s fed back into the effect.
		Negative (-) settings invert the phase.
HF Damp	200–8000	Adjusts the frequency above which
	Hz, BY-	sound fed back to the effect is fil-
	PASS	tered out. If you don’t want to filter
		out any the high frequencies, set
		this parameter to BYPASS.
Low Gain	-15– +15 dB	Gain of the low frequency range
High Gain	-15– +15 dB	Gain of the high frequency range
Balance #2	D100:0W–	Volume balance between the direct
	D0:100W	sound (D) and the effect sound (W)
Level	0–127	Output level

44: REVERSE DELAY (MFX2 only)

Adds the reverse of the input sound as a delay.

fig.MFX44
L in			2-Band	L out
	D1	1	EQ
	D2
Rev. Delay	Delay	2
	D4	D3
Feedback 1		3
	Feedback 4		2-Band	R out
R in			EQ

Parameter	Value	Description
Threshold	0–127	Volume level at which the reverse
		delay begins
Delay 1–4	0-2000 ms,	Adjusts the time until Delays 1–4
	note	are heard.
Feedback 1	-98– +98 %	Adjusts the amount of the delay
#1		sound that’s fed back into the effect.
Feedback 4		Negative (-) settings invert the phase.
HF Damp 1	200–8000	Adjusts the frequency above which
HF Damp 4	Hz, BY-	sound fed back to the effect is fil-
	PASS	tered out. If you do not want to filter
		out any high frequencies, set this
		parameter to BYPASS.
Pan 1–3	L64–63R	Stereo location of Delays 1–3 sound
Level 1–3	0–127	Output level of Delays 1–3 sound
Balance #2	D100:0W–	Volume balance between the direct
	D0:100W	sound (D) and the effect sound (W)
Low Gain	-15– +15 dB	Gain of the low frequency range
High Gain	-15– +15 dB	Gain of the high frequency range
Level	0–127	Output level

45: SHUFFLE DELAY (MFX2 only)

Adds a shuffle to the delay sound, giving the sound a bouncy delay

effect with a swing feel.

fig.MFX45

L in							2-Band	L out
	Feedback						EQ
						A
			Delay A
		Delay				B
			Delay B
R in							2-Band	R out
							EQ
Parameter		Value		Description
Delay #1		0–4000 ms,		Adjusts the time until the delay
		note		sound is heard.
Shuffle		0–100 %		Adjusts the ratio (as a percentage)
Rate				of the time that elapses before Delay
				B sounds relative to the time that
				elapses before the Delay A sounds.
					When set to 100%, the delay
					times are the same.
Pan A/B		L64–63R		Stereo location of Delay A/B
Level		A100:0B–		Volume balance between Delay A
Balance		A0:100B		and Delay B
Feedback		-98– +98 %		Adjusts the amount of the delay
#2				that’s fed back into the effect. Nega-
				tive (-) settings invert the phase.
Accelera-		0–15		Adjusts the time over which the De-
tion				lay Time changes from the current
				setting to its specified new setting.
HF Damp		200–8000		Adjusts the frequency above which
		Hz, BY-		sound fed back to the effect is fil-
		PASS		tered out. If you don’t want to filter
				out any high frequencies, set this
				parameter to BYPASS.
Low Gain		-15– +15 dB		Gain of the low frequency range
High Gain		-15– +15 dB		Gain of the high frequency range
Balance #		D100:0W–		Volume balance between the direct
		D0:100W		sound (D) and the effect sound (W)
Level		0–127		Output level

106