Roland MC-909 Modulation Delay MFX2 only, Multi-Effects List Triple TAP Delay MFX2 only, 105

40: MODULATION DELAY (MFX2 only)

Adds modulation to the delayed sound.

When Feedback Mode is NORMAL:

fig.MFX40a

					Balance D		2-Band
L in								L out
							EQ
		Delay			Modulation		Balance W
	Feedback
	Feedback
							Balance W
		Delay			Modulation
R in							2-Band	R out
					Balance D		EQ
When Feedback Mode is CROSS:
fig.MFX40b
					Balance D		2-Band
L in								L out
							EQ
		Delay		Modulation			Balance W
		Feedback
		Feedback
		Delay			Modulation		Balance W
R in							2-Band	R out
					Balance D		EQ
Parameter			Value			Description
Feedback			NORMAL,			Selects the way in which delay
Mode			CROSS			sound is fed back into the effect (See
						the figures above.)
Delay Left			0–2000 ms,			Adjusts the time until the delay
Delay Right			note			sound is heard.
Feedback			-98– +98 %			Adjusts the amount of the delay
						sound that’s fed back into the effect.
						Negative (-) settings invert the
						phase.
HF Damp			200–8000			Adjusts the frequency above which
			Hz, BY-			sound fed back to the effect is fil-
			PASS			tered out. If you don’t want to filter
						out any high frequencies, set this
						parameter to BYPASS.
Rate			0.05–10.00			Frequency of modulation
			Hz
Depth			0–127			Depth of modulation
Phase			0-180 deg			Spatial spread of the sound
Low Gain			-15– +15 dB			Gain of the low frequency range
High Gain			-15– +15 dB			Gain of the high frequency range
Balance #			D100:0W–			Volume balance between the direct
			D0:100W			sound (D) and the delay sound (W)
Level			0–127			Output level

Multi-Effects List

41: TRIPLE TAP DELAY (MFX2 only)

Produces three delay sounds; center, left and right.

fig.MFX41

Balance D

L in			2-Band	L out
			EQ
	Left Tap		Balance W
Triple Tap Delay		Center Tap
Feedback	Right Tap		Balance W
R in			2-Band	R out
			EQ
		Balance D

Parameter	Value	Description
Delay Left/	0–4000 ms,	Adjusts the time until the delay
Right/Center	note	sound is heard.
Feedback	-98– +98 %	Adjusts the amount of the delay
#1		sound that’s fed back into the effect.
		Negative (-) settings invert the phase.
HF Damp	200–8000	Adjusts the frequency above which
	Hz, BY-	sound fed back to the effect is fil-
	PASS	tered out. If you do not want to filter
		out any high frequencies, set this
		parameter to BYPASS.
Left/Right/	0–127	Volume of each delay
Center Level
Low Gain	-15– +15 dB	Gain of the low frequency range
High Gain	-15– +15 dB	Gain of the high frequency range
Balance #2	D100:0W–	Volume balance between the direct	Effects
	D0:100W	sound (D) and the delay sound (W)
Level	0–127	Output level

42: QUADRUPLE TAP DELAY (MFX2 only)

This effect has four delays.

fig.MFX42a

		Balance D
L in			L out
	Feedback	Delay 1	Balance W
		Delay 2
	Quadruple Tap Delay
		Delay 3
		Delay 4	Balance W
R in		Balance D	R out
		fig.MFX42b
2	3	Stereo location of each delay

14

LR

Parameter	Value	Description
Delay 1–4	0–4000 ms,	Adjusts the time until the delay
	note	sound is heard.
Level 1–4	0–127	Volume of each delay
Feedback	-98– +98 %	Adjusts the amount of the delay
#1		sound that’s fed back into the effect.
		Negative (-) settings invert the phase.
HF Damp	200–8000	Adjusts the frequency above which
	Hz, BY-	sound fed back to the effect is fil-
	PASS	tered out. If you do not want to filter
		out any high frequencies, set this
		parameter to BYPASS.
Balance #2	D100:0W–	Volume balance between the direct
	D0:100W	sound (D) and the delay sound (W)
Level	0–127	Output level

105