Sample Edit

Amp

This operation applies an envelope (time-variant change) to the

volume of the sample.

1.Press [NORMALIZE/AMP] and then press [F3 (Amp)].

Alternatively, hold down [SHIFT] and press [F6 (Amp)]).

2.Press [F1 (Sample List)] and select a sample.

3.Use [CURSOR (up/down)] to select a parameter.

4.Use [VALUE] or [INC/DEC] to set the value.

Current Point

Currently selected point

 

Beginning near the start point, the points

 

will be numbered 1, 2, 3, or 4.

Point 1–4

Location of the current point

Rate 1–4

Amplification ratio of the current point

 

Specifies how the volume of each point is

 

to be boosted relative to the current value.

 

Range: 0–400%

5.If you want the edited sample to replace the current sample, press [F4 (Over Write)] to display the “” mark.

6.Press [F6 (Execute)].

A message will ask you for confirmation.

7.To execute, press [F6 (Execute)].

*To cancel, press [F5 (Cancel)].

122

Page 122
Image 122
Roland MC-909 owner manual 122, Press NORMALIZE/AMP and then press F3 Amp, Range 0-400%