Manuals / Keating Of Chicago / Household Appliance / Gas Heater

Keating Of Chicago 2000 HI-LIMIT Check BI-MONTHLY, Thermostat Calibration, Qualified Service

Models: 2000

1 22
Download 22 pages 27.58 Kb
Page 11
Image 11

PREVENTIVE MAINTENANCE

Preventive maintenance should be done in daily, week- ly, monthly and yearly intervals as necessary. Following preventive maintenance procedures will help keep your fryer working efficiently. Proper care and servicing will lead to years of quality performance.

PREVENTIVE MAINTENANCE CHART

 

TIME

 

OPERATOR/OWNER

 

 

 

 

 

FRAME

 

 

 

 

 

 

 

 

 

Daily*

 

￿ Check lights and controls.

 

 

 

 

￿ Check that the oil is up to “Fill Level” Line.

 

 

 

 

￿ Clean all baskets.

 

 

 

 

￿ Drain, strain or filter oil.

 

 

 

 

 

 

 

Weekly*

 

￿ Drain and clean fryer.

 

 

 

 

￿ Boil-out fryer.

 

 

 

 

 

 

 

BiMonthly

 

￿ Hi-Limit & Test procedures.

 

 

Monthly*

 

￿ Check calibration of the thermostat.

 

 

Yearly*

 

QUALIFIED SERVICE

 

 

 

 

PERSONNEL ONLY

 

 

 

 

￿ Check burner flame color and adjust air

 

 

 

 

shutters.

 

 

 

 

￿ Remove and clean all orifices.

 

 

 

 

￿ Check and replace radiants.

 

 

 

 

 

 

*High production facilities should be checked more often. Contact your local service company to perform maintenance and repairs.

HI-LIMIT CHECK BI-MONTHLY

The manual Hi-Limit test button can be used to test the Hi-Limit Control by pushing and holding the button in until the fryer reaches the Hi-Limit temperature (425°F). Place an accurate thermometer in the oil. If the Hi-Limit Control doesn’t shut off the fryer between 425°F and 450°F, have it replaced.

THERMOSTAT CALIBRATION

You will need:

One screwdriver with 1/8" wide flat blade

One accurate fryer thermometer

1.Set thermostat to desired frying temperature.

2.Allow fryer to cycle three times.

3.Place an accurate thermometer in the oil.

Thermostat calibration

NOTE: Locate thermometer in same position for every calibration. Left front corner of fryer vessel at the High Limit Bulb is recommended.

4.If temperature of fryer is found to be more or less than 15°F off, remove the thermostat knob. There are (4) screws holding the dial plate in place. Loosen the screws and reset the dial plate to match the thermometer reading.

BEFORE REPLACING, TEST THERMOSTATS

These operational problems can easily be correct- ed by thermostat bulb positioning.

Keating’s patented thermostat application is accu- rate within 2°F of the dial setting between 250°F – 350°F. This accuracy is attained only if the thermo- stat bulb is placed properly against the heat trans- fer tube. To quickly and accurately test for proper bulb placement, a single thickness of writing paper should be pulled through between the tube and the bulb with medium resistance.*

1. *For gas fryers 14":

￿The end of thermostat bulb should touch the burn- er tube.

2. For gas fryers 10x11, 18 & up:

￿If the bulb is too loose, the paper will slip through with little or no resistance. A fryer with a thermostat bulb that is too loose will overshoot.

Overshoot: The thermostat takes a long time to cycle and then misses its preset temperature by 20°F - 40°F yielding a poor quality product.

￿If the bulb is too tight, the paper will either not pull through or it will tear. A fryer with a thermostat bulb that is too tight will short cycle.

Short Cycle: The thermostat will cycle rapidly while the fryer is in the idle mode; the temperature will be erratic.

Thermostat Bulb Positioning 10x11, 18 & up Fryer Gas

9

Page 10 Page 12
Page 11
Image 11
Keating Of Chicago 2000 warranty HI-LIMIT Check BI-MONTHLY, Thermostat Calibration, Qualified Service
Page 10 Page 12

2000 specifications

Keating of Chicago 2000 is a remarkable example of innovation in the realm of high-performance vehicles, combining technology, design, and engineering prowess to create a stunning automobile that stands out. This vehicle is a product of the renowned Keating brand, known for its focus on creating bespoke sports cars that offer thrilling performance while maintaining luxurious comfort.

One of the standout features of the Keating of Chicago 2000 is its powerful engine. It is equipped with a high-performance V8 engine, capable of delivering exceptional horsepower and torque. This engine allows the vehicle to accelerate from 0 to 60 mph in a matter of seconds, showcasing the raw power that enthusiasts crave. The engineering behind the engine includes advanced fuel injection systems and turbocharging, enhancing efficiency and performance.

The chassis of the Keating 2000 is meticulously engineered using lightweight materials such as carbon fiber and aluminum. This contributes not only to the vehicle’s agile handling but also to improved fuel efficiency. The design incorporates a low center of gravity, allowing for enhanced stability during high-speed cornering.

Aerodynamics plays a crucial role in the design of the Keating of Chicago 2000. The body features sleek lines and an aggressive stance, which minimize drag and improve overall handling. Active aerodynamic components, such as adjustable spoilers, further optimize the vehicle’s performance at various speeds, making it suitable for both track days and everyday driving.

Inside, the Keating of Chicago 2000 boasts a luxurious and highly customizable interior. Premium materials such as leather, Alcantara, and bespoke wood finishes create an unparalleled ambiance. The latest technology is integrated seamlessly, including a state-of-the-art infotainment system, advanced navigation, and an audiophile-quality sound system.

Safety features are also a critical aspect of the Keating 2000. Equipped with advanced driver-assistance systems, the vehicle enhances driver confidence and promotes safe driving. Features such as adaptive cruise control, lane-keeping assist, and a comprehensive airbag system underline the brand’s commitment to safety without compromising the exhilarating driving experience.

In conclusion, the Keating of Chicago 2000 sets a benchmark in the luxury sports car segment, exemplifying a blend of performance, technology, and comfort. With its powerful engine, lightweight chassis, aerodynamic design, luxurious interior, and advanced safety features, it offers an unmatched driving experience that appeals to automotive enthusiasts and luxury car aficionados alike.