Optional Timer Operating Instructions | Keating Of Chicago 2000

STEP 2 PRESS all 3 buttons in sequence: left-center-right. The BEEPER will BEEP when each button is pressed. If BEEPER does not BEEP, the timer is defective. STOP TESTING. Reset procedure is completed when 1:00 appears on the digital dis- play.

1:00

OPTIONAL TIMER

OPERATING INSTRUCTIONS

PART # 056921

DIGITAL TIMERS

The electronic timers, standard on TS & IFM models, provide a clearly visible and accurate display and are very easy to use.

PROGRAMMING

To program the timers, the unit must be in the idle mode. Press and hold the set button for approximately two sec- onds. The display will show “SEt”. Press the button for the channel to be programmed. The display will show the cur- rent setting for that channel. Use the up or down button to increment or decrement the setting. When the setting is correct, press and hold the set button again for approxi- mately two seconds. The display will show "StO" for approximately two seconds and the timer will return to normal operation. Repeat the process as necessary for the other timers.

OPERATING LOGIC

When the timer is powered up, the display will show the time setting for the channel that was operated last and the relay output contacts will be open. To start a cycle, press the desired channel button (1-3). The display will begin to countdown from the preset time setting and the relay out- put contacts will close. During the countdown the colon will flash at a one-second rate. When the countdown has reached "00:00" the relay output contacts will open, the display will flash, and the audible alarm will sound. To can- cel the audible alarm, press any button.

PAUSE FEATURE

To pause a cycle in progress, press any button. The relay output contacts will open, the display will flash, and the countdown will pause. To resume the countdown, press any button. The display will resume the normal countdown and the relay output contacts will close.

CANCELING A CYCLE

To cancel a cycle in progress press and hold any button for approximately two seconds. The relay output contacts will open and the display will show the time setting for the channel last used.

WARRANTY REPAIRS

Keating's warranty begins with the date of installation. In the event that your Fryer, under warranty, needs repairs other than routine cleaning, you are requested to contact KEATING OF CHICAGO, INC. (1-800-KEATING) before calling a local service compa- ny.

ORDERING PARTS

Parts may be ordered by part number by calling your local service company or Keating at 1-800-KEATING. You may also order on-line at Keating’s part store, www.keatingofchicago.com.

Refer to the Keating Gas Fryer Limited Warranty for warranty service information.

The model/serial plate is located on the inside of the front door. The serial and model numbers are neces- sary when ordering.

WARNING AND OPERATING PLATES

All warning and operating plates on the Keating Gas Fryer should be in place at all times.

PARTS LIST

CONTROL PANEL AA GAS

Corresponds with parts list on page 12

2000 specifications

Keating of Chicago 2000 is a remarkable example of innovation in the realm of high-performance vehicles, combining technology, design, and engineering prowess to create a stunning automobile that stands out. This vehicle is a product of the renowned Keating brand, known for its focus on creating bespoke sports cars that offer thrilling performance while maintaining luxurious comfort.

One of the standout features of the Keating of Chicago 2000 is its powerful engine. It is equipped with a high-performance V8 engine, capable of delivering exceptional horsepower and torque. This engine allows the vehicle to accelerate from 0 to 60 mph in a matter of seconds, showcasing the raw power that enthusiasts crave. The engineering behind the engine includes advanced fuel injection systems and turbocharging, enhancing efficiency and performance.

The chassis of the Keating 2000 is meticulously engineered using lightweight materials such as carbon fiber and aluminum. This contributes not only to the vehicle’s agile handling but also to improved fuel efficiency. The design incorporates a low center of gravity, allowing for enhanced stability during high-speed cornering.

Aerodynamics plays a crucial role in the design of the Keating of Chicago 2000. The body features sleek lines and an aggressive stance, which minimize drag and improve overall handling. Active aerodynamic components, such as adjustable spoilers, further optimize the vehicle’s performance at various speeds, making it suitable for both track days and everyday driving.

Inside, the Keating of Chicago 2000 boasts a luxurious and highly customizable interior. Premium materials such as leather, Alcantara, and bespoke wood finishes create an unparalleled ambiance. The latest technology is integrated seamlessly, including a state-of-the-art infotainment system, advanced navigation, and an audiophile-quality sound system.

Safety features are also a critical aspect of the Keating 2000. Equipped with advanced driver-assistance systems, the vehicle enhances driver confidence and promotes safe driving. Features such as adaptive cruise control, lane-keeping assist, and a comprehensive airbag system underline the brand’s commitment to safety without compromising the exhilarating driving experience.

In conclusion, the Keating of Chicago 2000 sets a benchmark in the luxury sports car segment, exemplifying a blend of performance, technology, and comfort. With its powerful engine, lightweight chassis, aerodynamic design, luxurious interior, and advanced safety features, it offers an unmatched driving experience that appeals to automotive enthusiasts and luxury car aficionados alike.

Keating Of Chicago 2000 warranty Optional Timer Operating Instructions, Ordering Parts

Models: 2000