Manuals / Keating Of Chicago / Household Appliance / Gas Heater

Keating Of Chicago 2000 warranty If Equipment Arrives Damaged, Minimum Clearance

Models: 2000

1 22
Download 22 pages 27.58 Kb
Page 3
Image 3

INTRODUCTION

Instructions in this manual should be read thoroughly before attempting to operate this Keating Gas Fryer. All installation and service on Keating equipment must be performed by qualified, certified, licensed and/or autho- rized installation or service personnel.

Operating information for Keating equipment has been prepared for use by qualified and/or authorized per- sonnel.

Keating equipment is made in the U.S.A. and has American sizes of hardware. All metric conversions are approximate.

INSTALLATION INSTRUCTIONS

Proper installation will assure top performance. Alter- ation to your equipment will void the warranty. Before uncrating, check equipment carefully for damage.

IF EQUIPMENT ARRIVES DAMAGED

Keating does not assume responsibility for loss or damage incurred in transit.

IMPORTANT

This merchandise has been thoroughly inspected and carefully packed before leaving our plant. Responsibil- ity for its safe delivery was assumed by the carrier at the time of shipment. Claims for loss or damage to the contents should, therefore, be made upon the carrier, as follows:

CONCEALED LOSS OR DAMAGE

Concealed loss or damage means loss or damage which does not become apparent until the merchan- dise has been unpacked. The contents may be dam- aged in transit due to rough handling even though the carton may not show external damage. When the dam- age is discovered upon unpacking, make a written request for inspection by the carrier’s agent within fif- teen days of the delivery date. Then file a claim with the carrier since such damage is the carrier’s responsibili- ty. By following these instructions carefully, we guaran- tee our full support of your claims to protect you against loss from concealed damage.

VISIBLE LOSS OR DAMAGE

Any external evidence of loss or damage must be noted on the freight bill or express receipt, and signed by the carrier’s agent. Failure to adequately describe such external evidence of loss or damage may result in the carrier refusing to honor a damage claim. The form required to file such a claim will be supplied by the car- rier.

DO NOT RETURN DAMAGED MERCHANDISE

TO KEATING. FILE YOUR CLAIM AS ABOVE.

FIRST STEPS

POSITIONING

Keep appliance area free and clear of any com- bustibles. Position the Keating Gas Fryer 6 inches (152mm) from any combustible material. A minimum of 24 inches (610mm) should be provided at the front of the Keating Gas Fryer for servicing and proper opera- tion. Air for combustion enters the fryer from the bottom of the cabinet and the bottom of the control panel.

DO NOT BLOCK BOTTOM OF KEATING INSTANT RECOVERY® GAS FRYER CABINET. DO NOT OBSTRUCT FLUE.

Your Keating Instant Recovery® Gas Fryer is designed to be serviced from the front.

MINIMUM CLEARANCE

 

Clearances

 

 

Combustible

Noncombustible

 

Construction

Construction

Back

6"

0"

Right Side

6"

0"

MINIMUM CLEARANCE

 

Left Side

6"

0"

 

 

 

SUITABLE FOR COMBUSTIBLE FLOORS VENTI-

LATION

The Keating Gas Fryer must be installed in an area providing adequate air supply and ventilation. Do not obstruct the flow of combustion and ventilation air. Proper ventilation is one of the important considera- tions for efficient operation of the Keating Gas Fryer. It should be installed so that the products of combustion are removed efficiently without producing drafts that will interfere with proper burner operation. The intake for the exhaust fan should not be placed close to the flue of the Keating Gas Fryer to insure proper air flow necessary for combustion. The area around the front and bottom of the Keating Gas Fryer must be kept clear and unobstructed. In the U.S.A. the ventilation systems must conform to the ANSI/NFPA96 latest edi- tion. “A minimum of 18" (457mm) should be maintained between the flue outlet and the lower edge of the grease filters.” Must be installed at least 16" away from any open flame. It is the responsibility of the owner and the local installer to comply with national and local codes.

NATIONAL CODE REQUIREMENT

The installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas code, ANSI Z223.1 or the Natural gas Installation Code, CAN/CGA-B149.1 or the Propane Installation Code, CAN/CGA-B149.2. Flexible connectors must comply to ANSI Z221.69/CAN/CGA1.16. Keating equipment is designed and manufactured to operate

1

Page 2 Page 4
Page 3
Image 3
Keating Of Chicago 2000 If Equipment Arrives Damaged, Minimum Clearance, Suitable for Combustible Floors Venti Lation
Page 2 Page 4

2000 specifications

Keating of Chicago 2000 is a remarkable example of innovation in the realm of high-performance vehicles, combining technology, design, and engineering prowess to create a stunning automobile that stands out. This vehicle is a product of the renowned Keating brand, known for its focus on creating bespoke sports cars that offer thrilling performance while maintaining luxurious comfort.

One of the standout features of the Keating of Chicago 2000 is its powerful engine. It is equipped with a high-performance V8 engine, capable of delivering exceptional horsepower and torque. This engine allows the vehicle to accelerate from 0 to 60 mph in a matter of seconds, showcasing the raw power that enthusiasts crave. The engineering behind the engine includes advanced fuel injection systems and turbocharging, enhancing efficiency and performance.

The chassis of the Keating 2000 is meticulously engineered using lightweight materials such as carbon fiber and aluminum. This contributes not only to the vehicle’s agile handling but also to improved fuel efficiency. The design incorporates a low center of gravity, allowing for enhanced stability during high-speed cornering.

Aerodynamics plays a crucial role in the design of the Keating of Chicago 2000. The body features sleek lines and an aggressive stance, which minimize drag and improve overall handling. Active aerodynamic components, such as adjustable spoilers, further optimize the vehicle’s performance at various speeds, making it suitable for both track days and everyday driving.

Inside, the Keating of Chicago 2000 boasts a luxurious and highly customizable interior. Premium materials such as leather, Alcantara, and bespoke wood finishes create an unparalleled ambiance. The latest technology is integrated seamlessly, including a state-of-the-art infotainment system, advanced navigation, and an audiophile-quality sound system.

Safety features are also a critical aspect of the Keating 2000. Equipped with advanced driver-assistance systems, the vehicle enhances driver confidence and promotes safe driving. Features such as adaptive cruise control, lane-keeping assist, and a comprehensive airbag system underline the brand’s commitment to safety without compromising the exhilarating driving experience.

In conclusion, the Keating of Chicago 2000 sets a benchmark in the luxury sports car segment, exemplifying a blend of performance, technology, and comfort. With its powerful engine, lightweight chassis, aerodynamic design, luxurious interior, and advanced safety features, it offers an unmatched driving experience that appeals to automotive enthusiasts and luxury car aficionados alike.