Roland MC-909 owner manual Beam, System Information, 130

System

D Beam

Here you can make settings for the D Beam controller.

Parameter	Range	Explanation
[F1 (Solo Synth)]
Solo Synth Patch Bank	Refer to Patch List (p. 151)	Patch played by the solo synth
Solo Synth Patch No.
Solo Synth Note	0 (C-1)–127 (G9)	Reference note for the solo synth
Solo Synth Scale	FREE, CHROMATIC	Scale on/off
		FREE: Continuous (no steps)
		CHROMATIC: Semitone steps
Solo Synth Range	2OCTAVE, 4OCTAVE	Range of the solo synth
[F2 (Cut+Reso)]
Cutoff Range Lower	0–127	Filter cutoff frequency when you move your hand away from the D Beam
Cutoff Range Upper	0–127	Filter cutoff frequency when you move your hand near the D Beam
Resonance Range	0–127	Filter resonance when you move your hand away from the D Beam
Lower
Resonance Range Up-	0–127	Filter resonance when you move your hand near the D Beam
per
[F3 (Turntable)]
Turntable BPM Type	DOWN, UP	How the tempo will change when you move your hand near the D Beam
		DOWN: The tempo will slow down as you move your hand nearer.
		UP: The tempo will speed up as you move your hand nearer.
Turntable Pitch Type	DOWN, UP	How the pitch will change when you move your hand near the D Beam
		DOWN: The pitch will fall as you move your hand nearer.
		UP: The pitch will rise as you move your hand nearer.
[F4 (User Assign)]
Type	Control Change, Bend Up, Bend	Parameter that will be controlled by the D Beam
	Down, Bend Up/Down, Ch After-
	touch, Start/Stop, Glissando, Adlib,
	Arp Octave Up, Arp Octave Down,
	Arp Octave Both, Arp Duration,
	BPM Up, BPM Down, Pitch UP, Pitch
	Down, Effects C1, Effects C2, All
	Mute
Number	CC#1–CC#31, CC#33–CC#95	Control change number
		This can be set only if Type is set to “Control Change.”
Range Lower	0–127	Value of the parameter when you move your hand away
Range Upper	0–127	Value of the parameter when you move your hand nearer

System Information

Here you can view the state of the MC-909.

Press [F6 (Close)] to return to the System menu screen.

•[F1 (Features)]

Displays the main features of the MC-909.

•[F2 (Memory Info)]

Displays the amount of memory installed.

•[F3 (SRX Exp Info)]

Displays the name of the wave expansion board that is installed.

•[F4 (Version)]

Displays the version of the internal program.

130