AEG 84749 manual Washing cycle complete/Removing the washing

Page 26

Operating Instructions

Washing cycle complete/Removing the washing

Once the wash programme has come to an end the END indicator il- luminates on the programme progress display.

•If the EASY IRON programme was selected, and anti-crease phase of approximately 30 minutes follows the programme end. Here, the multi display shows the remaining time and the END indicator illumi- nates. During the anti-creasing phase, the door can be opened at any time and the washing can be removed.

•If RINSE HOLD was selected, the display next to the START/PAUSE button flashs.

01. After a rinse hold, the water must first be pumped out:

–Either press the START/PAUSE button (water is pumped out and the washing is spun according to the completed programme; using the RINSE HOLD spin speed button, it is possible to change the spin speed during spinning),

or

–Turn the programme selector to DRAIN and press the START/PAUSE button (the water is pumped off without spinning),

or

–Turn the programme selector to SPIN or SHORT SPIN and press START/

PAUSE button (water is pumped out and the washing is spun accord- ingly).

After the end of this programme step, the END display lights up.

2.Open the door.

As soon as the indicator next to the DOOR button is green, the door can be opened (not if programme security is activated. For details see „Pro- gramme security„).

3.Remove the washing.

4.Turn the programme selector to OFF.

5.After washing, pull the washing detergent drawer out a little so that it can dry out. Leave the door ajar so that air can circulate in the drum.

3	If the OVERDOSING indicator illuminates, then too much

	detergent was used in the washing programme just
	completed. Observe the dosing recommendations of the
	detergent manufacturer as well as the load quantity for the next wash.

Important: If the washing machine is not to be used for a long period: Close the water tap and disconnect the washing machine from the electricity mains. (Anti-flood: The Aqua Control with Aqua Alarm does not function if the power supply is interrupted).

26

Image 26

Contents ÖKO-LAVAMAT 84749 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Control Panel Programme selectorWash programme for Delicates at 30 C or 40 C To drain the water after a rinse hold without spinningRinse water it is not spun Wool / P HandwashProgramme Option Buttons PRE-WASH Pre-wash/SoakingProgrammable functions Time SaverRation, in minutes, of the programme Consumption Values and Programme TimesWash Time Display What does Update mean? Anti-flood Aqua Control + Aqua AlarmSorting and preparing the washing Before the first washPreparing for a wash cycle Types of washing and care symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions Setting the wash programmeRunning a washing cycle After the washing programme has endedWool / PHandwash Changing Spin Speed /selecting RinseJusted to suit the washing programme SILK/ PHandwashSetting the delay timer/soaking duration Delay timer Soaking durationDoor cannot be opened Opening and closing the doorLoading the washing Red Door is openFor use with the Stain programme option only Adding detergent/conditionersDetergents and conditioners Compartment for main wash deter- gentStarting the wash programme If using liquid detergents/tabletsIf a delay start has been set Push the detergent dispenser drawer in fullyMulti display Washing Programme ProgressProgramme progress display Changing spin speedWashing cycle complete/Removing the washing Programme Tables WashingSeparate Rinse/Conditioning/Starching/Treating Separate SpinningMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpLow Trouble ShootingWhat to do if Been removed Connection instructions OFF Rinse water is If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterEmergency unlocking of the door When the water is completely drainedUnlock feature Supply firstHelpful to rinse with extra water To cancel the additional rinseAdditional rinse cycle RINSE+ To set the additional rinseAdditional rinse cycle and water cooling To cancel water coolingWater cooling To set the water cooling functionTo set Variomatic Spin To cancel Variomatic SpinVariomatic spin Programme Protection Setting the Programme ProtectionCancelling the Programme Protection Washing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceWhen transporting the unit with a sack trolley Remove transport packagingAre supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Height adjustment About +10/-5mm Technical DataDimensions Dimensions in mmWarranty conditions Great BritainPage Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG