AEG 84749 manual Installation-Site preparation, Installation on a Suspended Floor

Page 47

Installation and connection instructions

Installation-Site preparation

•The installation surface must be clean, dry and level. Do not install on a deep pile carpet.

•Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet.

•If the appliance is installed next to a heat source (e.g. cooking appli- ance), a heat insulating pad (87 x 57 cm) must be placed between the appliance and the heat source.

•Do not install the appliance in locations where the temperature may fall below freezing.

•Please ensure that when the appliance is installed it is easily accessi- ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

47

Image 47

Contents ÖKO-LAVAMAT 84749 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control PanelWool / P Handwash To drain the water after a rinse hold without spinningRinse water it is not spun Wash programme for Delicates at 30 C or 40 CPRE-WASH Pre-wash/Soaking Programme Option ButtonsTime Saver Programmable functionsRation, in minutes, of the programme Consumption Values and Programme TimesWash Time Display Anti-flood Aqua Control + Aqua Alarm What does Update mean?Sorting and preparing the washing Before the first washPreparing for a wash cycle Types of washing and care symbols Water hardness details How much detergent and conditioner?Water softening After the washing programme has ended Setting the wash programmeRunning a washing cycle Brief instructionsSILK/ PHandwash Changing Spin Speed /selecting RinseJusted to suit the washing programme Wool / PHandwashSoaking duration Setting the delay timer/soaking duration Delay timerRed Door is open Opening and closing the doorLoading the washing Door cannot be openedCompartment for main wash deter- gent Adding detergent/conditionersDetergents and conditioners For use with the Stain programme option onlyPush the detergent dispenser drawer in fully If using liquid detergents/tabletsIf a delay start has been set Starting the wash programmeChanging spin speed Washing Programme ProgressProgramme progress display Multi displayWashing cycle complete/Removing the washing Washing Programme TablesSeparate Spinning Separate Rinse/Conditioning/Starching/TreatingMaintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpLow Trouble ShootingWhat to do if Been removed Connection instructions OFF Rinse water is If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingSupply first When the water is completely drainedUnlock feature Emergency unlocking of the doorTo set the additional rinse To cancel the additional rinseAdditional rinse cycle RINSE+ Helpful to rinse with extra waterTo set the water cooling function To cancel water coolingWater cooling Additional rinse cycle and water coolingTo set Variomatic Spin To cancel Variomatic SpinVariomatic spin Programme Protection Setting the Programme ProtectionCancelling the Programme Protection Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceWhen transporting the unit with a sack trolley Transporting the applianceCover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical DataDimensions Height adjustment About +10/-5mmGreat Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG