AEG 7200 manual Compensate for Floor Unevenness

Page 44

Setting up and connection instructions

Compensate for Floor Unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the

threaded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The unit must not wobble over when loaded.

3. If necessary, check the setting with a spirit level.

Attention! Never compensate for minor floor unevenness with un- derlays made of wood, card etc.

Always adjust the adjustable feet.

44

Image 44

Contents Lavamat 7200 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDisposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Drawer for Washing Powder and Care Agent Unit DescriptionFront View Main wash for cottons/linen at 30 C to 95 C Control panelProgramme selector Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P HandwashAdditional Programming Buttons Shortened main wash cycle for washing that is lightly soiledPull out the washing powder drawer slightly Consumption ValuesBefore the First Wash Prepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerWhen the programme is finished Performing a wash cycleQuick Start Guide Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent Or for water softenerSet the Washing Program Per minute Change Spin Speed / Select Rinse HoldRevolutions Progress indicator Starting the programmeProgramme display MultidisplayChanging the programme Changing or interruptingSelecting additional programme functions Changing the spin speedEnd of wash cycle/Taking out washing Programme charts WashDelicates VOORWAS, Prelav Separate spin Separate Conditioning/ Starching/ImpregnatingSeparate rinse Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifTrifug Is loose Outlet hose is loose LEN, Rincage Programme will con If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseDrain pump Housing foreign objects are protected by the pump wheelBefore cleaning the drain pump Carry Out an Emergency Emptying Operation Remove the emergency emptying hose from the holderWhen all the washing solution has drained off Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardTransporting the Unit TuresSupplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Technical Data DimensionsDelivery Heads over 1m Measurements in mmGuarantee conditions BelgiumGuarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG