Setting up and connection instructions
Electrical Connection
Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.
; This unit conforms to the following EU directives:
–the ”Low Voltage Directive" 73/23/EU with changes
–the ”EMC Directive" 89/336/EWG with changes
Water Connection
3 | The washing machine has safety features which prevent contamination |
| of the drinking water and which conform to the legal regulations of |
the water authorities (e.g. for Germany: DVGW regulations). Other pro- tection measures in the installation are therefore not necessary.
Attention!
– Units for connection to cold water must not be connected to hot wa- ter!
– Use only new sets of hoses for connection!
Permissible Water Pressure
The water pressure must be at least 1bar (= 10N/cm2 = 0.1MPa), maxi- mum 10bar (= 100N/cm2 = 1MPa).
•In the case of more than 10bar: Connect a
•In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter.
45