AEG 40850 manual Installation, Unpacking

Page 27

User’s instructions

10.3. Installation

10.3.1. Unpacking

Packing used to protect internal parts of the washing machine during transport must be removed before the washing machine is put into service for the first time.

Remove all packing from the washing machine. Tilt the washing machine sideways and then remove the packing under the motor, and straighten the washing machine.

Tilt the washing machine back-wards, rotate it by a quarter of a turn on one of its corner to remove the transport base.

Open the washing machine lid and remove the immobilization packing and plastic films. Close the lid.

Use a 10 mm spanner to remove the two screws and spacers at the back.

27

Image 27

Contents

Lavamat Summary User’s instructions UsagePrecautions against frost Symbol on the product or on its packaging indicates that ScrappingProtection of the environment Softener overflow If overfilled Washing machine descriptionDetergents dispenser Prewash Wash SoftenerMain washing for coloreds from 30C to 40C Control panelProgrammes selector Main washing for cotton or coloreds from 30C to 60CMain washing for delicates from 30C to 40C Prewash at 40C Main washing for synthetics from 30C to 60CMain washing for synthetics from 30C to 60C Main washing for synthetics from 30C to 40CAlso select the no Spinning position Additional programme pushbuttonsThermostat Spinning speed selectorProgress within the programme 80-90 Timer / Temperature Washing Water Energy DurationConsumptions and programme dura- tions 125-135Washing load depending on the nature of the material Sort the washing by type and care symbol see .4 InterWashing guide Sorting and preparing your washingDetergents and additives International symbols How to do a wash ? Loading the washingDetergents End of programme Select the desired spinning speedSelect the desired washing programme Start the washing programmeWashing Programmes tablesSeparate softener / starch Separate rinseSeparate spinning Care and cleaning Descaling the washing machineSurface Drain filter ReassemblyDrain residual water Remove the filter Operating problems Noisy Too long Symptom CauseMotor temperature safety device Water inlet temperature is lowerInstallation and connection instructions Washing machine dimensions Unpacking InstallationPosition Moving your washing machine Water inlet Garantee conditions and After Sales Service Technical characteristics

Related manuals

Manual 44 pages 24.93 Kb