AEG 40850 manual Select the desired spinning speed, Select the desired washing programme

Page 16

UIser’s instructions

6.5. Select the desired spinning speed

Choose the spinning speed which corresponds to the nature of your laundry and to the degree of humidity wished at the end of the wash. The knob indicates the possible spinnings on the cotton programmes. These spinnings are reduced for the synthetics, wool and delicate cy- cles.

6.6. Select the desired washing programme

Choose the programme depending on the natrue and dirtiness of your washing. Turn the knob in the clockwise direction until you find the chosen programme.

6.7. Start the washing programme

Check that the water tap is open.

Press the ON/OFF pushbutton to start your washing machine : the relevant light illuminates and the programme starts.

6.8. End of programme

The washing machine stops automatically and the programme selector stops on a stop position.

The programmes end :

by a spinning for the cotton and coloureds programmes.

by a short spinning for the synthetics, delicates and wool program-

mes

Release the ON/OFF pushbutton at the end of the cycle to switch your washing machine off. The control lamp lights off. Release any other pushbuttons.

Warning : you can not open the lid until about 2 minutes after the ap- pliance has stopped.

Remove the laundry. Unplug the appliance and switch off the water in- let tap. Check that the drum is empty : any garments left in the ap- pliance may be damaged during the next wash (shrinkage) or their colour may run onto other garments.

Note : we recommend you to leave the lid and the drum opened after

use in order to air the tub.

16

Image 16 Contents
Lavamat Summary Usage User’s instructionsPrecautions against frost Scrapping Symbol on the product or on its packaging indicates thatProtection of the environment Washing machine description Detergents dispenserPrewash Wash Softener Softener overflow If overfilledControl panel Programmes selectorMain washing for cotton or coloreds from 30C to 60C Main washing for coloreds from 30C to 40CPrewash at 40C Main washing for synthetics from 30C to 60C Main washing for synthetics from 30C to 60CMain washing for synthetics from 30C to 40C Main washing for delicates from 30C to 40CAdditional programme pushbuttons ThermostatSpinning speed selector Also select the no Spinning positionProgress within the programme Timer / Temperature Washing Water Energy Duration Consumptions and programme dura- tions125-135 80-90Sort the washing by type and care symbol see .4 Inter Washing guideSorting and preparing your washing Washing load depending on the nature of the materialDetergents and additives International symbols Loading the washing How to do a wash ?Detergents Select the desired spinning speed Select the desired washing programmeStart the washing programme End of programmeProgrammes tables WashingSeparate rinse Separate softener / starchSeparate spinning Descaling the washing machine Care and cleaningSurface Reassembly Drain filterDrain residual water Remove the filter Operating problems Noisy Symptom Cause Motor temperature safety deviceWater inlet temperature is lower Too longInstallation and connection instructions Washing machine dimensions Installation UnpackingPosition Moving your washing machine Water inlet Technical characteristics Garantee conditions and After Sales Service
Related manuals
Manual 44 pages 24.93 Kb