Operation Instructions, Functions

Operation Instructions

Press down power button.

Press down water level button.

Choose appropriate water level according to wash load quantity and then the corresponding indicator blink.

Water temperature choice

Push down the water temperature choice button, you can choose to inlet cold water or hot water. When the cold -water indicator and the hot-water indicator turn on simultaneously, which means you chose the warm water.

NOTE: The washer will provide a cold rinse in all TEMPERATURE settings.

IMPORTANT: A single cold hose system does not allow the washing machine to automatically (select) regulate incoming water temperatures to match those listed on the control panel such as WARM or HOT.

Press down program select button.

Choose appropriate program mode according to wash load quantity and then the corresponding indicator blink.

Press down function select button.

Choose the desired function group and then the corresponding indicator blink.

Press down Start/Pause button once and the machine will begin operation.

Please press this button to stop the normal operation, if it continues to work, press it again.

Water level can be reset during the normal operation. If the higher water level i s selected, the machine will operate after refilling the water.

Functions

Each wash set is programmed in the computer; see the details in the wash program chart.

	SOAK		WASH		RINSE		SPIN

Normal	20 Minutes	12 Minutes		2	Cycles	5	Minutes

Hard	30 Minutes	12 Minutes		2	Cycles	5	Minutes

Speedy	10 Minutes	5	Minutes	1	Cycle	2.5 Minutes

Gentle	10 Minutes	4	Minutes	2	Cycles	5	Minutes

Press down each button within 5 minutes since the program will reset the process group. Then press down “Start/Pause” button to re -start the washing machine. If not, the washing machine will shut down automatically.

Close the lid, or the washing mac hine will not operate .

Note:

Clothes easily discolored should be washed separately so as to prevent inter -dyeing.

?If you want to change a selected program, please press the Start/Pause button first, then press the Program button before pushing Start/Pause button.

?When Rinse & Drain program is on, do not use detergent.

?If you want to drain water during washing, press th e Start/Pause button, then select Rinse and Drain program. Press Start/Pause button again to restart.

?If you open the lid while the machine is running, all operations will be stopped within 7 seconds.

?To resume operation close the lid.