IMPORTANT SAFETY INSTRUCTIONS
?WARNING? | To reduce the risk of fire, electrical shock, or |
| injury when using your portable washer, follow |
| these basic precautions: |
?Read all instructions before using the portable washer.
?Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline,
?Do not add gasoline,
?Under certain conditions, hydrogen gas may be produced in a
?DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days.”
?Before you throw away your old portable washer: Take off the lid.
?Never allow children to operate, play with, or crawl inside the portable washer. Close supervision of children is necessary when the washer is used near children.
?Do not reach into the w asher if the agitator or inner tub is moving.
?Do not tamper with controls.
?Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user
?Never clean portable washer parts with flammable fluids. The fumes can create a fire hazard or explosion.
?Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may destroy the electrical insulation causing an electrical shock hazard.
?Do not store, use gasoline, or any other flammable vapors and liquids in the vicinity of this or any other portable washer. The fumes can create a fire hazard or explosion.
?If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
|
|
|
| ||
|
| INSTALLATION INSTRUCTIONS |
|
| |
Before Using Your Portable Washer | SCREWDRIVER | ||||
? | Remove the exterior and interior packing. | ||||
|
| ||||
? | You will need the following tools: |
|
| ||
| ? | Wrench |
|
| |
| ? | Pliers |
|
| |
| ? | Screwdriver |
|
| |
? | Check to be sure you have all of the following parts: | WRENCH | PLIERS |
?2 Inlet Hoses
?2 Faucet Adapters
?1 Noise Proof Plate With Screws
?4 Casters
?Remove shipping brace. Note - It should be saved and used (to prevent damage to washer components) whenever washer is moved or transported to a new location.
?Clean the interior surface with lukewarm water using a soft cloth.
?Allow 2 inches of space between the back and sides of the appliance.
7