Margheritashould not be, Installed in an outdoor

Margherita has been built in compliance with the strictest international safety regulations. To protect you and all your family.

M ARGHERITA

ImportantforthesafeuseofyourMargherita

Your safety and that of your family

Read these instructions and all the information in this manual carefully: they are an important source, not only of numerous useful tips, but also of vital information on safety, use and maintenance.

1. Margheritashould not be

installed in an outdoor

environment, not even

when a roof shelters the

area, because it may be

very dangerous to leave it

exposed to rain and

thunderstorms.

5.Never touch the washing machine when barefoot or with wet or damp hands or feet.

6.Never use extensions or multiple plugs,which are particularly dangerous in humid environments. The power supply cable must never be bent or dangerously compressed.

7.Neveropenthedetergent dispenser while the appliance is functioning; do not use hand wash detergent because the abundance of foam could damage its internal parts.

8. Never pull on the supply
cable or the washing
machine to disconnect it
from the wall socket: it is
extremely dangerous.
9. While the appliance is
functioning, do not touch
the drain water	as it
could reach very	high
temperatures.	The
appliance door, during
wash cycles, tends to
become hot; ensure that
children do no touch it.
Never force the washing

2. It must only be used by

adults and exclusively for

washing clothes following

theinstructionsprovidedin

this manual.

3. Shouldithavetobemoved,

proceed with the help of

two or three people and

handle it with the utmost

care. Never try to do this

alone, because the

appliance is very heavy.

4. Before loading the washing

machine, make sure the

drum is empty.

I only want an authorised specialised technician with original Ariston spare parts!

machine door because

this could damage the

safety lock which prevents

accidental opening when

the nachine is working.

Allow a few minutes at the

end of the program for the

lock to release.

10. In case of malfunctio-

ning, first close the

water tap and unplug the

appliance from the wall

socket; do not under any

circumstances touch

internal parts in order to

attempt repairs.

How to change the power supply cable

(For this operation we suggest you contact a qualified engineer)

The Margherita power supplycableisspecialand can be purchased

exclusively from authorised Technical ServiceCentres.

To replace the cable:

1.Make sure that Mar- gherita is switched off and unplugged.

Fig. 3

2.Remove the covering lid by unscrewing the two screws I, and then pull it towards you [fig. 3].

3.Disconnect the wires from the radio interference suppressor F [fig. 4] noting as to their position (Blue=N wire; Brown=L wire) leaving the earth wire until

last .

Fig. 4

N.B.: letters L, N and the symbol are indicated on the radio interference suppressor.

4.Remove the upper part of the cable slightly from the back panel of the appliance, pull the power supply cable upwards and take it out [fig. 5].

Fig. 5

To connect the new power supply cable, reverse the procedure.

To put the covering lid back on, rest it on the washing machine [fig. 6] and let it slide forwards until the hooks situated on the front slide into the special slots formed into the control panel and tighten the screws back on.

Fig. 6

13Margherita - Instructions for installation and use