WatchGuard Technologies XTM 5 Series manual Applicable Documents Revision History

Page 21

Design for Manufacturing and Environment Document

3.22– Push tabs on the inside of the bezel to disengage from the chassis. Remove the bezel. A flat-head screwdriver can be useful in this step.

Material removed (P/N & material type)

Bezel

230-3820-001 – bezel, red, glossy; 1 ea.

Chassis bottom212-3817-001 – bottom,

chassis, red; 1 ea

Instruction visual

Push tabs

Push tabs

4.0Applicable Documents

5.0Revision History

REV.

REV. DATE

REVISED SECTION

REASON

ECO#

NO.

 

 

 

 

 

 

 

 

 

A

6/10/10

New document

Initial Release

1790

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WatchGuard Technologies.Doc #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system

Image 21
Contents XTM 5 Series De-manufacturing Instructions Design for Manufacturing and Environment Document Purpose Labels Warranty Void Instruction visual Memory Module114-3626-001 1GB Power Supply Power Supply140-3822-001 Power Remove top Remove screw and cable tie Design for Manufacturing and Environment Document Heatsink Battery 412-2468-001 battery CR2032 1 ea Chassis bottom212-3817-001 bottom Chassis Fan145-3599-015 Fan Unscrew CPU 113-3552-001 CPU Celeron 440, 2.0GHz, 1 ea LCD cable assembly148-3691-002 LCD cable Compact Flash card121-0554-010 Compact Motherboard299-3810-002 Pcba Motherboard700-3015-001 LCM Power switch assembly175-3596-001 power Applicable Documents Revision History