WatchGuard Technologies XTM 5 Series manual Chassis bottom212-3817-001 bottom

Page 12

Design for Manufacturing and Environment Document

3.10 – Remove fan screws from back of chassis.

Material removed (P/N & material type)

Screws 200-4506-242 – screws,

black, 12 ea.

Chassis bottom212-3817-001 – bottom,

chassis, red; 1 ea

Instruction visual

3.11– Remove screws from fan duct and remove fan duct.

Material removed (P/N & material type)

Fan duct 212-3544-001 – fan duct;1

ea.

Screws 203-7306-002 – screws,

pan head; 4 ea.

Instruction visual

Remove

WatchGuard Technologies.Doc #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 11 Page 13
Image 12
Page 11 Page 13
Contents XTM 5 Series De-manufacturing Instructions Design for Manufacturing and Environment Document Purpose Labels Warranty Void Instruction visual Memory Module114-3626-001 1GB Power Supply Power Supply140-3822-001 Power Remove top Remove screw and cable tie Design for Manufacturing and Environment Document Heatsink Battery 412-2468-001 battery CR2032 1 ea Chassis bottom212-3817-001 bottom Chassis Fan145-3599-015 Fan Unscrew CPU 113-3552-001 CPU Celeron 440, 2.0GHz, 1 ea LCD cable assembly148-3691-002 LCD cable Compact Flash card121-0554-010 Compact Motherboard299-3810-002 Pcba Motherboard700-3015-001 LCM Power switch assembly175-3596-001 power Applicable Documents Revision History
Top Page Image Contents