Using the Inverter | Schumacher XP2260 specification

6.When the product is deflated to the desired level, push the Compressor/ Inflator switch to the OFF position and remove the adapter.

5.9Before Using the Inverter Important Safety Instructions:

1.Keep the Instant Power™ well ventilated in order to properly disperse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides, and do not block the vents on the back of the Instant Power™.

2.Make sure the Instant Power™ is not close to any potential source of flammable fumes, gases or clothing.

3.Keep the Instant Power™ dry.

4.DO NOT allow the Instant Power™ to come into contact with rain or moisture.

5.DO NOT operate the Instant Power™ if you, the Instant Power™, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury or death.

6.Do not place the Instant Power™ on or near heating vents, radiators or other sources of heat.

7.Do not place the Instant Power™ in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

8.Do not use the inverter near an open engine compartment where fumes or gases may accumulate.

9.Do not modify the AC receptacles in any way.

5.10Using the Inverter

It is important to know the continuous wattage of the device you plan to use with the inverter. The Instant Power™ must be used with devices drawing 400 watts or less. If the wattage is not marked on the device, use only devices that draw less than 3.4 Amps of AC current.

Devices like TVs, fans or electric motors require additional power to start

(commonly known as the “starting or peak power”). The Instant Power™ can supply a momentary surge in wattage; however even devices rated less than the maximum 400 watts can exceed the inverters surge capability and cause an automatic overload shutdown.

Do not use the inverter with a product that draws a higher wattage than the inverter can provide, as this may cause damage to the inverter and the product.

Make sure the device you are using is compatible with a modified sine wave inverter.

Always run a test to establish whether the inverter will operate a particular piece of equipment or device.

In the event of a power overload, the inverter is designed to automatically shut down. This safety feature prevents damaging the inverter while testing devices and equipment with the 400-watt range.

If powering more than one device, start one device at a time to avoid a power surge and/or inverter overload. The surge load of each device should not exceed the inverter’s Continuous Operation wattage rate.

If you are using the power inverter to operate a battery charger, monitor the temperature of the battery charger for about 10 minutes. If the battery charger becomes abnormally warm, disconnect it from the inverter immediately.

• 9 •

XP2260 specifications

The Schumacher XP2260 is a versatile and powerful battery charger and maintainer designed for both professional and home use. Renowned for its durability and advanced features, the XP2260 provides reliable battery care for various types of vehicles, including cars, trucks, and motorcycles. One of its standout features is its ability to charge both 6V and 12V batteries, making it suitable for a wide range of applications.

Equipped with an automatic smart charge technology, the XP2260 continuously monitors the battery's status and adjusts the charging process to ensure optimal performance. This includes an automatic shut-off feature that prevents overcharging, thereby extending the life of the battery. Users will appreciate the digital display that provides real-time feedback on the battery's voltage and current, enabling them to monitor the charging process conveniently.

Another noteworthy aspect of the Schumacher XP2260 is its built-in desulfation mode, which helps to rejuvenate worn-out batteries. This technology works by removing sulfation buildup, thereby restoring the battery's capacity and reliability. The unit also includes a multi-stage charging feature, ensuring a thorough and efficient charging cycle that enhances the performance and longevity of the battery.

Safety is a priority with the XP2260, which features reverse polarity protection. This prevents damage to the charger and vehicle in the event the clamps are accidentally connected in reverse. Additionally, it is designed with durable casing and is built to withstand tough working conditions, making it a reliable tool for any garage or workshop.

Ease of use is another hallmark of the Schumacher XP2260. The charger comes with easy-to-follow instructions, and its compact design allows for easy storage and portability. Whether you’re a seasoned mechanic or a casual user, this battery charger provides excellent performance and peace of mind.

In summary, the Schumacher XP2260 is a robust battery charger that combines advanced features with user-friendly operation. Its ability to handle both 6V and 12V batteries, smart charging technology, and safety features make it an essential tool for anyone looking to maintain their vehicle’s battery efficiently. With the Schumacher XP2260, users can ensure their batteries remain in peak condition, ready to deliver reliable performance.