Water Supply Connection, Drain Connection

3.3 WATER SUPPLY CONNECTION

1.Check that inlet pressure lies between the following values: 50-900kPa. For higher pressures, install a pressure reducer.

2.Connect the cold water inlet hose (light blue ring nut) to the cold water tap with a ¾ gas thread, taking care to screw it firmly into place in order to prevent leaks. The water inlet hose must not be bent or crushed and must not be replaced or cut.

3.If a hot water inlet is used, inlet water temperature must not exceed 60°C and the hose with the red ring nut must be connected to the hot water tap.

Attention!

•If the water pipe is new or has not been used for a long time, let a certain amount of water run before attaching the inlet hose. This stops any deposits of sand and other impurities from clogging the filters used by the machine to protect the water inlet valves.

•The new hose-set supplied with the appliance are to be used and the old hose-set should not be reused

3.4 DRAIN CONNECTION

1.Insert the end of the drain hose into a drain pipe having an internal diameter of at least 4 cm and a height ranging between 50 and 90 cm, or attach it (using the relative curved plastic profile) to a basin or bath tub.

2.Always check that the end of the drain hose is securely attached in order to prevent the repulsive force of the water from moving it out of position.

Attention!

•Do not bend or obstruct the hose as this will reduce the flow of water.

•Any extensions to the drain hose must not exceed 1 metre, they must have the same internal diameter and must not be obstructed in any way.

•In no case may the end of the drain hose be submerged in water.

3.5 ELECTRICAL CONNECTION

Before fitting the plug into the socket, make sure that:

1.Input voltage matches that indicated on the name plate attached to the inner edge of the door.

2.The contactor, pressure relief valves, power line and socket are capable of withstanding the maximum rated power input indicated on the name plate.

3.The socket is compatible with the plug supplied with the machine without the need to fit multiple sockets, adaptors or extension leads that could cause overheating or burning.

If the socket does not correspond to the supplied plug, replace the socket with one of a suitable type.

Attention

•The plug must be accessible after installation.

•The appliance must be earthed. Plug the machine into a socket fitted with an efficient earth connection.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to earth the appliance or from a defective earth connection. Correct electrical connections guarantee maximum safety.

•This appliance complies with EEC directive 89/336 of 3.5.89 (modified by EEC directive 92/31) relative to the elimination of radio interference.

•If the power cord is damaged, only replace it with an original spare part available from our service department.

•Do not insert/remove the plug from the socket if your hands are wet.

•Remove the plug from the socket by gripping the plug and not the cord.

STA161S2, STA161S1 specifications

The Smeg STA161S1 and STA161S2 stand out in the realm of freestanding cookers, combining sleek design, innovative technology, and impressive performance. These models are perfect for those who appreciate a blend of aesthetics and functionality in their kitchen appliances.

The STA161S1 and STA161S2 both feature a modern design, characterized by clean lines and an elegant finish that adds a touch of sophistication to any kitchen décor. Available in a contemporary color palette, these cookers can easily complement various styles, from minimalist to more traditional interiors.

At the heart of the STA161 series is a multifunction oven that provides the ultimate cooking flexibility. This oven allows users to choose from several cooking functions, including conventional cooking, fan-assisted cooking, and even grilling options. With a generous oven capacity, home cooks can prepare multiple dishes simultaneously, making it ideal for families or entertaining guests.

One of the notable technologies in the Smeg STA161 models is the innovative vapor clean system, which simplifies oven maintenance. The vapor clean function uses steam to loosen stubborn food residues, making it easier for users to wipe down the interior without the need for harsh chemicals or excessive scrubbing. This feature not only saves time but also enhances the longevity and appearance of the oven.

Equipped with an efficient energy rating, the STA161S1 and STA161S2 are designed to minimize energy consumption while delivering exceptional cooking results. These models contribute to a more sustainable kitchen environment without compromising performance.

The cooktop of both models features a combination of gas burners, offering precise temperature control for various cooking techniques. The burners are designed for safety and efficiency, providing even heat distribution and optimal cooking results. Additionally, the cookers often come with cast iron grates, which are robust and durable, enhancing the overall cooking experience.

Another key characteristic of the Smeg STA161 series is its user-friendly interface, which includes intuitive controls and a clear display. Users can easily select their desired cooking mode and temperature settings, allowing even novice cooks to achieve professional outcomes.

In summary, the Smeg STA161S1 and STA161S2 are versatile, high-performance cookers that marry style and technology. With their multifunction oven, efficient cleaning system, and user-friendly features, these models are designed to streamline the cooking process while elevating the overall aesthetic of the kitchen. Whether you are roasting, baking, or simmering, the STA161 cookers are equipped to meet all culinary challenges with ease and elegance.