Smeg WDF16BAX manual Safety Warnings

Page 4

GB

2. SAFETY WARNINGS

Attention!

These warnings are given for safety reasons.

Please read them carefully before installing and using the appliance.

This manual forms an integral part of the appliance and must therefore be kept intact together with the machine. Before using the appliance, carefully read all the instructions contained in this manual. Installation must be performed by a qualified technician in compliance with the regulations in force. It has been designed for domestic use and complies with EEC Directives 72/23, 89/336 (including 92/31 and 93/68) currently in force. The appliance is designed for the following purpose: washing and drying linen or fabrics declared by their manufacturers to be suitable for machine washing by means of an appropriate symbol. Any other use shall be considered improper. The manufacturer declines all responsibility for uses other than those described above.

The name plate featuring the technical data, serial number and markings is visibly positioned on the inner edge of the door. This name plate must never be removed.

Do not leaving discarded packaging materials unsupervised within the home. Separate the various packaging materials and take them to the nearest sorted waste collection centre.

The electrical and plumbing work require to install the appliance may only be performed by qualified technicians.

The appliance must be provided with an earth connection in accordance with the electrical safety regulations in force. The manufacturer declines all responsibility for damage to persons or property resulting from failure to earth the appliance or from a defective earth connection.

If the appliance is not connected to the electrical power supply by means of a plug, it is necessary to install an isolation switch with a contact opening gap of at least 3 mm.

The plug on the power cord and the corresponding socket must be of the same type and must conform to the regulations in force. Check that the voltage and frequency of the electrical power supply match the ratings on the name plate. Avoid using adaptors or shunt connections. Never unplug the appliance by pulling the power cord.

The machine is only disconnected from the electrical power supply if the plug has been removed from the socket or if the general switch has been turned off. After installation, the plug must remain accessible.

The appliance must always be connected to the water supply with new hoses (supplied with the appliance). Old hoses must never be reused.

Make sure the appliance does not lie on the power cord.

Before use, make sure the tub assembly has been released (see instructions).

If the tub assembly has not been released, it may damage the appliance or adjacent furniture or appliances during the spin cycle.

The washer dryer must never be used in vehicles, on ships or planes, or in special environmental conditions such as explosive or corrosive (powder, vapour and gas) atmospheres or near explosive and/or corrosive liquids.

Do not install the washer dryer in areas subject to frosting. Frozen pipes may burst under pressure.

Make sure that the drain hose is securely attached to the basin and cannot move.

If it is not securely fitted, the repulsive force of the water may detach it from the basin and cause flooding.

When attaching the hose to the basin, make sure the water drains away rapidly and does not fill the basin up.

Do not overload the appliance.

Never use detergents containing solvents or chemicals.

These may damage the machine and form poisonous fumes.

They may also catch fire and explode.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Washer Dryer Contents NEW Washing System Safety Warnings Only be performed by qualified technicians Unpacking Installation InstructionsPositioning and Levelling Drain Connection Water Supply ConnectionElectrical Connection Description of Controls Control PanelTime remaining End of cycle END Error codes LEDQuick wash Button Increase water button Options enabled LEDs Detergent TrayPreparing the Washing Washing InstructionsOpening the Door Loading the Washing Adding Detergent and AdditivesDosing Liquid Detergents Dosing Powder DetergentsSCALE-REMOVERS Modifying Starting Parameters SecondsInterrupting or Changing the Washing Programme Starting the Washing ProgrammeEND of Programme END of Programme Beeper Drying InstructionsGeneral WASH-ONLY Programmes WASH+DRY ProgrammesDRY-ONLY Programme Interrupting or Changing the Drying Programme END of Drying ProgrammeProgramme Finished Buzzer Models with Humidity SensorCleaning and Maintenance External CleaningCleaning the Drum Cleaning the Door GasketCleaning the Detergent Tray Cleaning the Water Inlet Filter Troubleshooting Error Signals Control Panel Symbols Section

WDF16BAX specifications

The Smeg WDF16BAX is a stylish and efficient dishwasher that exemplifies the brand's commitment to quality and innovation. Known for its distinctive retro aesthetic, this model perfectly blends functionality with a vintage design, making it a popular choice among modern households seeking both performance and elegance.

One of the main features of the WDF16BAX is its generous capacity, capable of accommodating up to 13 place settings. This makes it ideal for families or individuals who enjoy hosting dinner parties. The interior is thoughtfully designed with adjustable and removable racks, which allow for greater flexibility in loading various types of dishes, from large pots to delicate glassware.

The Smeg WDF16BAX comes equipped with a range of washing programs and options, including intensive wash, eco wash, and quick wash settings. The intensive wash is perfect for tackling stubborn, baked-on food residue, while the eco wash program focuses on energy efficiency without compromising cleaning performance. The quick wash feature is ideal for lightly soiled dishes, providing a fast and efficient clean in a short amount of time.

Another noteworthy technology in the WDF16BAX is its Energy Class A+ rating, which indicates its efficiency in both water and energy usage. This model is designed to minimize environmental impact while reducing utility bills, making it a sustainable choice for eco-conscious consumers.

The dishwasher also offers a sophisticated noise reduction system, ensuring quiet operation even during cycles. This is particularly beneficial for open-concept living spaces where noise can be disruptive. In addition, the Smeg WDF16BAX features an adjustable delay timer, allowing users to schedule the wash cycles for maximum convenience, such as running the dishwasher during off-peak hours.

Moreover, the WDF16BAX includes a touch control panel that allows for easy navigation through various settings and programs. The LED display provides clear information about the cycle status, further enhancing user-friendliness.

In conclusion, the Smeg WDF16BAX dishwasher not only provides exceptional cleaning capabilities but also adds a touch of vintage charm to any kitchen. With its array of features, energy efficiency, and elegant design, it stands out as a versatile and reliable appliance for modern living. Whether you're a busy professional or a home chef, this dishwasher ensures that clean-up is a breeze.
Top Page Image Contents