For the condenser (products with a condenser)
Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank.
CClean the condenser after every 15 drying cycles or once a month.
To clean the condenser:
1.If a drying process has been carried out, open the door of the product and wait until it cools down.
2.Unlock the 4 condenser locks after opening the kick plate.
3.Pull out the condenser.
4.Clean the condenser with pressurized water and wait until the water drains.
5.Replace the condenser with the side of it labelled with “Top” facing upwards.
Lock the 4 condenser locks. Make sure that the red lock on the upper right corner is engaged securely.
6.Close the kick plate cover.
Close properly and check the locking latchs?
19- EN