Roper REC3422A, RGC3422A, REP3422A warranty Diapers, baby clothes Elastlt Items

Page 14

Curtalns, slipcovers

lDraperies, slipcovers

l Sheers, some synthetic curtains

l Bonded or laminated fabrics

Diapers, baby clothes

Elastlt Items

FIberglass materlals

Flame- retardant flnlshes

Napped

Items

lCorduroy, velveteen

Qullted, down- fllled Items

Snowsults,

Jackets

lNylon, polyester-base

Tlnted, dyed or noncolorfast Items

Remove drapery weights and hooks before laundering.

1.Use lowest temperature or an Air setting.

2.Leave room in dryer for load to fluff.

3.Remove from dryer while slightly damp. Do not overdry.

For slipcovers, replace while still slightly damp. They will dry to fit tightly. Dry only a few minutes.

Do not overdry or tumble in high heat. Overdrying loosens the adhesive and causes fabrics to separate.

Wash and dry small items in a mesh bag or pillowcase for convenient handling.

1.Dry according to fabric and cycle settings listed on page 8.

2.Remove diapers and cotton knit items while still slightly damp. They will feel softer, shrink less, and be easier to fold.

Dry at lowest temperature setting. Remove from dryer while still slightly damp.

Do not machine wash or dry fiberglass materials. Small particles can stick to fabrics washed or dried in following loads and cause skin irritation.

Some items have been treated with a flame-retardant finish to improve their resistance to burning. Such items are clearly labeled. To retain flame-retardant qualities through continuous use and washing, clean and dry according to the manufacturer’s instructions.

Dry separately or with similar colors to avoid lint transfer. Follow care label directions.

1.Dry according to fabric and cycle settings shown on page 8.

2.Remove from dryer while there is still a trace of moisture.

3.Smooth, reshape and air dry before putting away.

Follow care label instructions.

1.Dry one at a time.

2.Remove from dryer and shake or fluff the item during the drying cycle.

3.Smooth and reshape before putting away.

Check label for fiber content, then see page 8 for cycle and temperature recommendations.

Follow care label directions.

1.Dry garment for about 10 minutes. Remove and turn inside out. Dry for 10 more minutes.

2.Remove from dryer immediately and hang on a nonrusting hanger to finish drying. This will help eliminate wrinkles.

Dry according to fabric, weight and care label instructions. Wipe the dryer drum carefully to remove any dye or lint that can be transferred to other loads. See “Cleaning the dryer interior” on page 10.

14

Image 14
Contents UseAndCare Your safety is important to us Thank you for buying a Roper applianceUnderstanding Safety What to do if YOU Smell GASImportant SAFEl-Y Instructions Understanding your responsibilitiesOptional deflector kit Knowing Your Dryer’s FeaturesOptional mounting kits Starting or stopping your dryer Operating Your DryerBefore starting your dryer Type of Loadi Using the Air cycle no heatSelecting a cycle AIR CycleDelicate Fabrics Type of LoadPermanent PRESS, Synthetics and Blends ModelsCleaning the lint screen Maintenance-every loadMaintenance-as needed Cleaning a clogged lint screenCleaning the dryer interior Cleaning the dryer exteriorLint removal Replace panel reconnect and level dryer again, if necessaryDrying tips Laundry TipsBefore you dry SortingDrying special-care items Diapers, baby clothes Elastlt Items Vacation care Using dryer fabric softenersSaving energy Voltage requirementsCAUSES/SOLUTIONS Solving laundering problemsProblem Shrlnklng Items Are overdried Fabric type and quality is Before calling for assistance If You Need Assistance Or ServiceSolution Check ifProblem Check Solution If you need serviceIf you are not satisfied with how the problem was solved If you need assistanceWARRAN-IY Dryer WarrantyLength of Warranty What WE will PAY for Full ONE-Y EAR What WE will not PAY for