Selecting a cycle
Use pages 7 and 8 to find information about drying cycles that may be on your model.
To Select a cycle:
1.Turn the Cycle Control Knob either way to a desired time or setting.
2.Stop when the indicator points to the cycle you want.
3.Push the Start Button.
Changing a selectIon:
1.Turn the Cycle Control Knob to point to a new setting.
2.Push the Start Button, if necessary.
Using the Air cycle (no heat)
Flro Hazard
Do not dry plastic or rubber items with heat. Use the Air cycle, or line dry.
Failure to do so could result in fire or damaged items.
The dryer does not heat when the Cycle Control Knob is set in the Air cycle. This cycle can be used to fluff or air dry bedding, plastic tablecloths, foam pillows, sneakers, etc.
1.Turn the Cycle Control Knob to the number of minutes you want in the Air cycle. (Cycle is unheated.) Refer to the chart below for suggested times.
2.Push the Start Button.
NOTE: Repeat steps above if more time is needed to dry items.
TYPE OF LOADI
RUBBER, PLASTIC,
Olefin, Polypropylene, Sheer nylon