Water outlet connection • Fix the outlet hose to run into the sink or the bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm).
•Wall drain must be installed properly and must enable occasional cleaning.
•Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor.
The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level.
Connect the appliance to the mains supply
187352
•Plug the mains power cable to the wall mains socket.
•Required voltage and other information are written on the rating plate above the door opening of the machine.
The wall socket must be accessible at all times and must be equipped with an earth lead (in accordance with the local safety regulations).
The permanent connection must be fitted by an authorized personnel only.
Damaged mains power cable may be replaced only by the producer or his authorized personnel.
Never plug the appliance into the electric shaver socket or hair dryer socket.