Maintenance

User-Maintenance Instructions

Lubrication

All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary.

Do not lubricate the door hinge. If the hinge makes noise, replace the hinge.

Cold Weather Care

If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.

Care of Your Washer

Use only a damp or sudsy cloth for cleaning the control panel. Some cleaning product sprays may harm the finish on the control panel or damage the interior of the hood.

Wipe the washer cabinet as needed. If detergent, bleach or other washing products are spilled on the cabinet, wipe immediately. Some products will cause permanent damage if spilled on the cabinet.

Do not use scouring pads or abrasive cleansers.

The wash drum will need no particular care although it may need rinsing or wiping after an unusual load has been washed.

The outside of the door window can be cleaned with household window cleaner.

Running an occasional rinse cycle with bleach will help to avoid a musty smell in the wash drum.

Cleaning Glass Sealing Area

In order to assure that the door properly seals against water leaks, the following surfaces should be wiped off periodically:

∙The outside perimeter of the door glass where the seal contacts the glass

∙The front surface of the door seal lip

Usually a mild soap solution will work. If there is an extreme build-up of minerals from a hard water supply, the surfaces may need to be cleaned with a lime removal chemical.

Replacing Hoses

Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subjected to.

All hoses should be checked on a monthly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years.

Filter Screens

Check the filter screens in the fill hoses for debris or damage annually. Clean or replace them if necessary.

If the washer is filling with water slower than normal, check the filter screens. Clean or replace them if necessary.

Order filter screen Part No. F270300 from the nearest authorized parts distributor.

Vacations and Extended Non-Use

IMPORTANT: To avoid possible property damage due to flooding, turn off the water supply to the washer whenever there will be an extended period of non-use.

Leave the loading door open during extended periods of non-use to allow the wash drum to dry out and avoid a musty smell.

803148

FLW1526C specifications

The Alliance Laundry Systems FLW1526C is a cutting-edge commercial washer designed specifically for durability and efficiency in laundry environments. This front-loading washer is part of Alliance’s range of high-capacity models, making it an ideal choice for laundromats, hotels, and other businesses that require reliable and consistent washing solutions.

One of the standout features of the FLW1526C is its impressive capacity. With a 26-pound load capacity, this washer can handle sizable laundry tasks, reducing the number of cycles needed and increasing productivity. Efficiency is further enhanced by the washer's advanced water extraction capabilities, which help minimize drying times and energy consumption.

The FLW1526C utilizes innovative technology to optimize performance. It is equipped with an intuitive microprocessor control system that simplifies operation and allows for customizable wash cycles. Users can select from a variety of preset cycles tailored to different fabric types and cleaning needs, ensuring that garments receive the best treatment possible while maintaining their integrity.

Durability is a hallmark of Alliance Laundry Systems design, and the FLW1526C reflects this commitment. Constructed with a robust stainless steel wash basket, it can withstand the rigors of frequent use without compromising performance. Additionally, the heavy-duty cabinet is designed to resist wear and tear, ensuring a long lifespan for the machine.

Another significant feature of the FLW1526C is its eco-friendly design. It operates with water-saving technologies that help reduce overall consumption without sacrificing wash quality. This not only leads to cost savings over time but also supports sustainable business practices.

The machine's user-friendly interface is designed for simplicity, making it accessible for operators of all skill levels. The large door provides easy loading and unloading access, and the modern aesthetic of the machine complements any laundry facility environment.

Overall, the Alliance Laundry Systems FLW1526C combines high capacity, advanced technology, and robust construction to meet the demands of commercial laundry operations. Its efficiency, flexibility, and user-friendly design make it a valuable investment for businesses looking to enhance their laundry capabilities.