Alliance Laundry Systems CHM1772C manual Safety Decals

Page 6

Safety Information

WARNING

This machine must be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of this type of machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment damage, and may void the warranty.

SW004

IMPORTANT: Ensure that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.

WARNING

Install the machine on a level floor of sufficient strength. Failure to do so may result in conditions which can produce serious injury, death and/or property damage.

W703

CAUTION

Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.

SW025

WARNING

Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam must be turned off and the pipe, connections, and components allowed to cool before the pipe can be touched.

SW014

Safety Decals

Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the operator or service technician.

To provide personal safety and keep the machine in proper working order, follow all maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer immediately.

Use manufacturer-authorized spare parts to avoid safety hazards.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F8208401

Image 6
Contents Washer-Extractors Page Contents Safety Information Explanation of Safety MessagesImportant Safety Instructions Safety Information Safety Decals Operator Safety Do not bypass any safety devices in the machineIntroduction Model IdentificationModel Introduction Introduction Model SCL125KNV SCU125KNVReplacement Parts Customer ServiceNameplate Location CN040GC2OUID01 Introduction Model Number Familiarization GuideOperation Operating InstructionsBleach OperationDetergent SoftenerMaintenance DailyMaintenance WeeklyMonthly Flat-Pulley Alignment Distance from EdgeQuarterly Machine Bearing Torque CapacityCare of Stainless Steel
Related manuals
Manual 57 pages 51.99 Kb