Alliance Laundry Systems CHM1772C manual Operator Safety

Page 7

Operator Safety

WARNING

NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury.

SW012

To ensure the safety of machine operators, the following maintenance checks must be performed daily:

1.Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. Make certain that spares are available.

2.Check door interlock before starting operation of the machine:

a.Attempt to start the machine with the door open. The machine should not start with the door open.

b.Close the door and start the machine. The machine should not start with the door unlocked.

c.Attempt to open the door while the cycle is in progress. The door should not open.

If the door lock and interlock are not functioning properly, disconnect power and call a service technician.

3.Do not attempt to operate the machine if any of the following conditions are present:

a.The door does not remain securely locked during the entire cycle.

b.Excessively high water level is evident.

c.Machine is not connected to a properly grounded circuit.

Safety Information

Do not bypass any safety devices in the machine.

WARNING

Operating the machine with severe out-of- balance loads could result in personal injury and serious equipment damage.

W728

F8208401

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

5

Image 7
Contents Washer-Extractors Page Contents Explanation of Safety Messages Safety InformationImportant Safety Instructions Safety Information Safety Decals Do not bypass any safety devices in the machine Operator SafetyModel Identification IntroductionModel Introduction SCL125KNV SCU125KNV Introduction ModelCustomer Service Replacement PartsNameplate Location Introduction Model Number Familiarization Guide CN040GC2OUID01Operating Instructions OperationSoftener OperationDetergent BleachDaily MaintenanceWeekly MaintenanceMonthly Distance from Edge Flat-Pulley AlignmentMachine Bearing Torque Capacity QuarterlyCare of Stainless Steel
Related manuals
Manual 57 pages 51.99 Kb