Alliance Laundry Systems 802756R3 manual Troubleshooting, Washer Symptom Possible Cause / Solution

Page 21

Troubleshooting

Try these troubleshooting tips before making a service call. You may save time and money!

Washer Symptom

 

Possible Cause / Solution

 

 

 

Won’t Fill

•

Make sure power cord is plugged all the way into the electrical outlet.

 

• Make sure hot and cold water faucets are turned on.

 

• Make sure that the fill hoses are not kinked or twisted.

 

• Press and hold the start button for two seconds to start washer.

 

• Make sure that the controls are properly set.

 

• Make sure that the loading door is closed tightly.

 

• Check the house fuse or circuit breaker.

 

• Clean the screens in the water mixing valve and the filter screens located at the faucet end

 

 

of the fill hoses. (Owner is responsible for service calls regarding cleaning of the screens.)

 

 

 

Won’t Start

•

Make sure loading door is closed tightly.

 

• Press and hold start button for two seconds to start washer.

 

• Make sure power cord is plugged all the way into the electrical outlet.

 

• Make sure cycle selector knob is not set to the OFF position.

 

• Check the house fuse or circuit breaker.

 

• Make sure door latch is properly adjusted relative to door lock.

 

 

 

Won’t Spin/Tumble

•

Make sure loading door is closed tightly.

 

• Press and hold the start button for two seconds to start washer.

 

• Make sure power cord is plugged all the way into the electrical outlet.

 

• Make sure controls are properly set.

 

• Check the house fuse or circuit breaker.

 

• Broken drive belt. Call the service person.

 

• Foreign object trap in pump may be clogged. Clean the trap. Refer to Maintenance section.

 

 

 

Stops/Pauses During Cycle

•

Pauses are part of the washer’s normal operation.

 

• Wash load may be unbalanced. Washer will stop and then restart spin automatically. If the

 

 

washer is severely unbalanced, turn cycle selector knob to OFF and redistribute the load.

 

• Check the house fuse or circuit breaker.

 

 

 

Won’t Drain

•

Make sure drain hose is not kinked or twisted.

 

• Make sure drain hose is not clogged.

 

• Make sure drain receptacle is not clogged.

 

• Refer to the Installation Instructions to make sure that the drain hose has been properly

 

 

installed.

 

• Foreign object trap in pump may be clogged. Clean the trap. Refer to Maintenance section.

 

 

 

Water Leaks

•

Check that fill hoses are properly installed on the faucets and the washer’s water mixing

 

 

valve.

 

• Check the condition of the fill hoses. Replace fill hoses every five years.

 

• Check the condition of the rubber door gasket for tears or holes.

 

• Make sure drain receptacle is not clogged.

 

•

Check house plumbing.

 

• Laundry load may be oversudsing or overloaded. Make sure you are using low-sudsing, high

 

 

efficiency (HE) detergent and proper load sizes.

 

• Make sure outside perimeter of the door glass where seal contacts glass is clean.

 

 

 

 

 

(continued)

-21-

802756

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

Page 20 Page 22
Image 21
Page 20 Page 22
Contents May For your Frontload WasherWA R N I N G Safety Information Explanation of Safety MessagesImportant Safety Instructions 802756 802756 Before Washing OperationPrepare Wash Load Sort ItemsLoading the Washer Wash TemperatureLoad Articles Load SizesWater Temperature Use Comments Wash Temperature GuideCold Water EnergyDetermine Proper Cycle Operating Your WasherUse to stop a cycle or change cycles Extra RinseLoad clothes into wash drum. Refer to section on Load Sizes Set WASH/RINSE temperaturesSelect Extra Rinse if desired Window may be hot in the Boosted Hot and Hot wash cyclesTo Change Cycles Change the cycle selected on the cycle selector knobManual Soaking To Pump Out Water After Aborting CycleDoor Light Wash LightRegular Cycle Activity Water Temperatures Permanent Press Cycle Activity Water TemperaturesAvailable Washing Cycles Rinse & Spin Cycle Activity Water Temperatures Handwash/Delicate Cycle Activity Water TemperaturesCommon Washer Sounds Sounds CauseUsing Your Dispenser Drawer Detergent CompartmentDetergent Bleach Fabric Softener To Clean the Dispenser Liquid Bleach CompartmentFabric Softener Compartment Problem Cause Solution Clothing CareClothing Concerns Maintenance Cleaning Foreign Object Trap Reinstallation of Shipping MaterialsReinstall front access panel Vacations and Extended Non-UsePreventative Maintenance Frequency Maintenance ProcedureOperates properly Washer Symptom Possible Cause / Solution TroubleshootingToo Many Soap Suds Make sure house water heater is adjusted properlyDetergent AmountSerial Number Contact InformationPage Ref R3QU Mai Pour laS E E N G a R D E Explications des consignes de sécurité SécuritéConsignes de securite importantes Conserver ces instructions802756 QU 802756 QU Fonctionnement Dans un lot de lavage, ces accessoires peuventAvant le lavage Préparer les vêtements à laverChargement de la machine à laver Volumes de chargesPré-traitement Chargement du lingeSuchauffage de l’eau chaude certains modèles seulement Température de lavageEau chaud Eau tièdeFonctionnement de votre machine à laver Recommandée pour lavage des CommentairesGuides des températures de lavage ÉnergieUtiliser pour arrêter un cycle ou pour changer de cycle Déterminer le cycle« on », les cycles Regular Normal Pour laver les vêtementsW095R2QU FLW2170N Régler les températures de lavage et de rinçage Choisir au besoin Extra Rinse Extra RinçageChanger le cycle Trempage manuel Voyant Porte Vider l’eau après l’interruption d’un cycleVoyant Lavage Voyant RinçageCycle Régulier Action Températures de l’eau Cycles de lavageCycle Lavage À LA MAIN/DÉLICAT Action Températures de l’eau Bruits normaux émis par la machineBruits Cause Ou pièces cognant le tambour ou la vitreCompartiment à détergent Utilisation du tiroir distributeurCompartiment à javellisant liquide Détergent Agent de blanchiment AssouplissantNettoyer le distributeur Compartiment à assouplisseurSoins des vêtements Problème Cause SolutionProblèmes les plus fréquents SuitePas être lavés avec ceux qui l’attirent Charpie excessive Tri incorrectDétergent insuffisant ou Détergent sans phosphateEntretien Réinstallation du matériel d’expédition Vacances et longues périodes de non-utilisationAbaisser doucement le panneau pour le retirer de la machine Fréquence Procédure de maintenance Maintenance préventiveNettoyage du collecteur dobjets étrangers Pour en assurer le bon fonctionnementDépannage Problème Cause possible/SolutionBranché sur le mélangeur d’eau froide signalé par un « C » Recommandée par le fabricant du produitIl y a une fuite deau Deau de la machine à laverPersonne-ressource

802756R3 specifications

Alliance Laundry Systems is a prominent name in the commercial laundry industry, known for its commitment to quality, innovation, and efficiency. One of their standout products is the model designated 802756R3, which exemplifies the company's mission to deliver high-performance laundry solutions tailored to various commercial applications.

The Alliance Laundry Systems 802756R3 is primarily a robust washing machine designed for medium to large-scale operations. Its main features include a high-capacity drum that accommodates significant loads, allowing laundromats, hotels, and hospitals to process larger volumes of laundry in a single cycle. This capability drastically reduces processing times and enhances overall productivity.

One of the key technologies incorporated into the 802756R3 is its advanced electronic control system. This system offers a user-friendly interface, allowing operators to program different wash cycles tailored to specific fabric types and soiling levels. This flexibility ensures optimal care for every load, extending the lifespan of textiles while maintaining cleanliness.

Energy efficiency is another hallmark of the 802756R3. Alliance Laundry Systems has integrated technologies aimed at reducing water and energy consumption, which is particularly vital for businesses looking to minimize operational costs. By utilizing features such as precise load sensing, the machine adjusts water levels accordingly, preventing waste without compromising wash quality.

Another contributing factor to the machine's performance is its durable construction. Designed with heavy-duty components and materials, the 802756R3 can withstand the rigors of commercial use. Its solid build not only enhances longevity but also ensures that it operates smoothly under constant stress, reducing the likelihood of breakdowns and costly repairs.

The 802756R3 is also equipped with innovative vibration reduction technology, which minimizes noise and ensures a more pleasant working environment. This feature is essential for facilities where noise can be a concern, such as hotels and hospitals.

In addition to its impressive features, the 802756R3 adheres to industry standards for safety and reliability. Manufacturer support and an extensive warranty further instill confidence in users, ensuring that they can count on this machine for consistent performance.

In summary, the Alliance Laundry Systems 802756R3 is an exceptional commercial washing machine designed for high efficiency, durability, and user-friendliness. Its smart technology, energy conservation measures, and robust construction make it a preferred choice for various commercial laundry operations, ensuring high performance and exceptional results in every wash cycle. This model represents the pinnacle of Alliance Laundry Systems' dedication to advancing laundry equipment solutions.
Top Page Image Contents