Beko WM 6103 W manual First use, Electrical requirements, Fitting a different plug

Page 11

fuse.

•The specified voltage must be equal to your mains voltage.

•Do not make connections via extension cables or multi-plugs.

BDamaged power cables must be replaced by the Authorized Service Agents.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

BThis appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.

2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder

11

EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Automatic washing machine Explanation of symbols Table of Contents Overview Your washing machineTechnical specifications Intended use Important safety instructionsGeneral safety Childrens safetyPage Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcementConnecting to the drain Connecting water supplyElectrical connection Adjusting the feetFitting a different plug First useElectrical requirements Disposing of the old product Disposing of packaging materialTransportation of the product Preparing laundry for washing PreparationThings to be done for energy saving Sorting the laundryLoading the laundry Correct load capacityUsing detergent and softener Using limescale remover Using gel and tablet detergentUsing starch Using bleachesControl panel Operating the productMain programmes Preparing the machineProgramme selection Spin + Drain Temperature selectionSpin speed selection Programme selection and consumption table Child Lock Auxiliary function selectionStarting the programme Changing the selections after programme has started Canceling the programmeProgress of programme Loading door lockEnd of programme Cleaning the body and control panel Maintenance and cleaningCleaning the detergent drawer Cleaning the loading door and the drumDraining remaining water and cleaning the pump filter Page Tap is turned off. Open the inlet water taps fully TroubleshootingPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Page Guarantee Republic of Ireland ServiceService once the manufacturers guarantee has expired UK Mainland & Northern Ireland
Related manuals
Manual 36 pages 26.35 Kb

WM 6103 W specifications

The Beko WM 6103 W is a front-loading washing machine that combines efficiency, practicality, and modern technology. Designed with the user in mind, this model offers a range of features that make laundry days more manageable and less time-consuming.

One of the standout characteristics of the Beko WM 6103 W is its impressive 6 kg capacity, which is suitable for smaller households. It can handle a variety of loads, from everyday garments to specialized fabrics, making it versatile enough for different laundry needs. The machine boasts a spin speed of 1000 RPM, which ensures effective water extraction, leading to reduced drying times.

Energy efficiency is another key feature of the Beko WM 6103 W. It retains an A+++ energy rating, indicating low energy consumption without compromising performance. This efficiency translates to cost savings on energy bills and a reduced environmental footprint, making it an eco-friendly choice for conscious consumers.

Equipped with a range of wash programs, the Beko WM 6103 W caters to various fabric types and soil levels. The machine includes specialized cycles such as the Cotton, Synthetics, and Delicates programs, allowing users to select the most suitable option for their laundry. Additionally, the Quick Program enables users to wash lightly soiled clothes in just 30 minutes, a feature that adds convenience to busy lifestyles.

The Beko WM 6103 W also incorporates innovative technologies to enhance the washing process. The AquaWave system features specially designed drum movements that create a wave-like effect, providing gentle yet efficient cleaning. This system ensures clothes are treated with care while achieving high-quality washing results.

Furthermore, the machine is designed with user-friendly controls. The intuitive dial and LED display allow for easy navigation through the settings and programs, enabling users to select their desired options effortlessly. Safety features, such as the child lock and overflow prevention system, add an extra layer of security for family households.

In conclusion, the Beko WM 6103 W is a practical and efficient washing machine that combines various features and technologies to meet the demands of modern living. With its user-friendly design, eco-friendly performance, and effective washing capabilities, it is a reliable choice for those seeking a dependable appliance to simplify their laundry routine.
Top Page Image Contents