Beko WM 6103 W manual

Page 28

Loading door cannot be opened.

•Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme.

•Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.

•Child lock is engaged. Door lock will be deactivated a couple of minutes after the programme has come to an end. >>> Wait for a couple of minutes for deactivation of the door lock.

Washing takes longer time than the one specified in the manual.

•Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

•Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.

•Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

•Number of rinses and/or amount of rinse water might have increased. >>>

Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

•Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Programme time does not countdown.

•There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

28

EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Automatic washing machine Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Important safety instructions General safetyChildrens safety Intended usePage Installation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Electrical connectionElectrical requirements First useFitting a different plug Transportation of the product Disposing of packaging materialDisposing of the old product Preparation Things to be done for energy savingSorting the laundry Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using gel and tablet detergent Using starchUsing bleaches Using limescale removerOperating the product Control panelProgramme selection Preparing the machineMain programmes Spin speed selection Temperature selectionSpin + Drain Programme selection and consumption table Starting the programme Auxiliary function selectionChild Lock Canceling the programme Progress of programmeLoading door lock Changing the selections after programme has startedEnd of programme Maintenance and cleaning Cleaning the detergent drawerCleaning the loading door and the drum Cleaning the body and control panelDraining remaining water and cleaning the pump filter Page Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Page Guarantee Service Service once the manufacturers guarantee has expiredUK Mainland & Northern Ireland Republic of Ireland
Related manuals
Manual 36 pages 26.35 Kb

WM 6103 W specifications

The Beko WM 6103 W is a front-loading washing machine that combines efficiency, practicality, and modern technology. Designed with the user in mind, this model offers a range of features that make laundry days more manageable and less time-consuming.

One of the standout characteristics of the Beko WM 6103 W is its impressive 6 kg capacity, which is suitable for smaller households. It can handle a variety of loads, from everyday garments to specialized fabrics, making it versatile enough for different laundry needs. The machine boasts a spin speed of 1000 RPM, which ensures effective water extraction, leading to reduced drying times.

Energy efficiency is another key feature of the Beko WM 6103 W. It retains an A+++ energy rating, indicating low energy consumption without compromising performance. This efficiency translates to cost savings on energy bills and a reduced environmental footprint, making it an eco-friendly choice for conscious consumers.

Equipped with a range of wash programs, the Beko WM 6103 W caters to various fabric types and soil levels. The machine includes specialized cycles such as the Cotton, Synthetics, and Delicates programs, allowing users to select the most suitable option for their laundry. Additionally, the Quick Program enables users to wash lightly soiled clothes in just 30 minutes, a feature that adds convenience to busy lifestyles.

The Beko WM 6103 W also incorporates innovative technologies to enhance the washing process. The AquaWave system features specially designed drum movements that create a wave-like effect, providing gentle yet efficient cleaning. This system ensures clothes are treated with care while achieving high-quality washing results.

Furthermore, the machine is designed with user-friendly controls. The intuitive dial and LED display allow for easy navigation through the settings and programs, enabling users to select their desired options effortlessly. Safety features, such as the child lock and overflow prevention system, add an extra layer of security for family households.

In conclusion, the Beko WM 6103 W is a practical and efficient washing machine that combines various features and technologies to meet the demands of modern living. With its user-friendly design, eco-friendly performance, and effective washing capabilities, it is a reliable choice for those seeking a dependable appliance to simplify their laundry routine.
Top Page Image Contents