case “Start/Pause/Cancel” led will blink.
Changing Program
You can use this feature for washing laundry in the same textile group for washing at lower or higher temperatures. For example, instead of Cotton60, Cotton40 can be used. For selecting Cotton40 instead of Cotton60 by pressing “Start/Pause/Cancel” key machine is switched to pause position. Program knob is turned for selecting Cotton40 program.
Even program selection button is changed during the program initially selected program will be executed. For changing washing program continuing program must be cancelled. (See Cancelling a program)
For selecting additional functions or spin cycle necessary changes can be performed after pressing Start/Pause/Can- cel button. Although selected additional program must be compatible with washing program. For example when your machine is main wash mode you can select additional rinse function but you can not select
Adding laundry
If you want to add laundry to your machine after program begins press Start/Pause key for switching machine to pause mode. If water level in the machine is appropriate “ready” led on program progress display is on and laundry can be added to the machine. If “ready” led is not on after one minute than water level in the machine is not appropri- ate and laundry can not be added. You can press “Start/
Pause/Cancel” key for continuing program.
Time delay for program start
Use time delay key you can start 3 hour,6 hours or 9 hours later for starting selected washing program.
When time delay key is pressed one 3hours delay is ad- justed and led will go on. If same key is pressed once more delay is 6hours, and if it is pressed once more 9 hours delay is selected. If time delay key is pressed again delay is cancelled. After selection of time delay when “Start/ Pause/Cancel” is pressed program can be started with delay. During delay period door can be opened or laundry can be added
After time delay is initiated by pressing “Start/Pause/Can- cel” you can switch machine to “Pause” mode and change delay time.
Canceling a Program
For canceling a program “Start/Pause/Cancel” key is pressed for three seconds. After this period “Start/Pause/ Cancel” and all other leds will be off .You can select a new program and start washing.
16