Beko WM 6111 W manual Canceling the programme, End of programme

Page 24

Canceling the programme

Press and hold Start / Pause / Cancel button for 3 seconds to cancel the current programme. At the end of this period, machine can drain the water inside it or can take in and drain water up to 3 times to cool down the laundry. Washing and End lights turn on.

Once draining is complete, Start / Pause

/Cancel and Washing lights turn off, and Loading Door light starts flashing.

When the Loading Door is openable, Loading Door light turns on and remains lit. In this case, you can select and start the new programme.

End of programme

End light in the programme follow-up indicator will light up once the programme comes to an end.

1.Press On / Off button to switch off the machine.

2.Take out your laundry and close the loading door. Your machine is ready for the next washing cycle.

24

EN

Image 24

Contents Automatic washing machine Explanation of symbols Table of Contents Your washing machine OverviewTechnical specifications Important safety instructions General safetyChildrens safety Intended usePage Installation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksConnecting water supply Connecting to the drainAdjusting the feet Electrical connectionFirst use Electrical requirementsFitting a different plug Disposing of packaging material Transportation of the productDisposing of the old product Preparation Things to be done for energy savingSorting the laundry Preparing laundry for washingCorrect load capacity Loading the laundryUsing detergent and softener Using gel and tablet detergent Using starchUsing bleaches Using limescale removerTips for efficient washing Soiling Level ClothesOperating the product Control panelPreparing the machine Programme selectionMain programmes Temperature selection Spin speed selectionSpecial programmes RinseProgramme selection and consumption table Auxiliary function selection Starting the programmeChild Lock Changing the auxiliary function, speed and temperature Progress of programmeLoading door lock Changing the selections after programme has startedCanceling the programme End of programmeMaintenance and cleaning Cleaning the detergent drawerCleaning the loading door and the drum Cleaning the body and control panelDraining remaining water and cleaning the pump filter Page Troubleshooting Tap is turned off. Open the inlet water taps fullyPage Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Foam is overflowing from the detergent drawer Guarantee Service Service once the manufacturers guarantee has expiredUK Mainland & Northern Ireland Republic of Ireland