Beko ECO WMB 81445 LW manual Maintenance and cleaning, Cleaning the water intake filters

Page 31

Maintenance and cleaning

C Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.

A WARNING: Never use sponge or scrub materials. These will damage the painted and plastic surfaces.

7.3Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

7.4 Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do get dirty.

7.5Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend.

If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter.

In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.

A WARNING: Foreign substances left in the pump filter may damage your machine or may cause noise problem.

In order to clean the dirty filter and discharge the water:

1. Unplug the machine to cut off the supply power.

A WARNING: Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down.

1.Close the taps.

2.Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, take them out by means of pliers and clean them.

3.Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.

4.Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand.

2.Open the filter cap.

If the filter cap is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.

If the filter cap is one piece, pull the cap from both sides at the top to open.

31 / 44 EN

Image 31
Contents ECO WMB 81445 LW Automatic washing machine44 EN Dear Customer Explanation of symbolsImportant information or useful hints about usage Troubleshooting Guarantee Service Important instructions for safety Environment4Installation Maintenance and cleaningService life of your product is 10 years Important instructions for safety and environmentGeneral safety Unplug the product when not in useThis appliance’s packaging material is Package informationCompliance with WEE Directive Disposing of the waste productTop panel Loading door Control panel Power cableYour washing machine OverviewYour washing machine Package Contents Your washing machine Technical specifications Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcementConnecting water supply Installation10 / 44 EN Adjusting the feet Installation Connecting to the drain12 / 44 EN Installation Electrical connectionElectrical requirements Fitting a different plug13 / 44 EN Sorting the laundry Preparation14 / 44 EN Correct load capacity Preparation Preparing laundry for washingThings to be done for energy saving Preparation Loading the laundry Preparation 18 / 44 EN Initial use19 / 44 EN Preparation Tips for efficient washingOn / Off button Display symbolsOperating the product Control panelAdditional programmes Operating the product Preparing the machineProgramme selection Main programmesSpecial programmes Operating the productUse a lower spin speed for delicate laundries Temperature selectionSpin speed selection 23 / 44 EN24 / 44 EN Operating the product Programme and consumption table25 / 44 EN Operating the product Auxiliary function selectionPrewash Extra RinseTime display Delayed startChanging the delayed start period Cancelling the Delayed Start functionChanging the selections after programme has started Operating the product Starting the programmeProgress of programme Loading door lockEnd of programme Cancelling the programmeMachine is in Rinse Hold mode Child Lock29 / 44 EN Quick User GuideMonths Cleaning the detergent drawerCleaning the loading door and the drum 30 / 44 ENDraining remaining water and cleaning the pump filter Maintenance and cleaningCleaning the water intake filters Cleaning the body and control panelPull the emergency draining hose out from its seat Install the filter32 / 44 EN Machine does not fill with water Troubleshooting33 / 44 EN Programme cannot be started or selected34 / 44 EN TroubleshootingIt does not rinse well 35 / 44 ENWater pressure is low. Check the water pressure 36 / 44 ENLaundry does not smell like the softener Detergent residue in the detergent drawerFoam is overflowing from the detergent drawer On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door 37 / 44 EN38 / 44 EN GuaranteeWhat is covered? Or Bord Gais registered Gas InstallerGas ServiceService once the manufacturers guarantee has expired 0845 60040 / 44 EN Complying Commission Delegated Regulation EU No 1061/20141 / 44 EN 42 / 44 EN 43 / 44 EN

ECO WMB 81445 LW specifications

The Beko ECO WMB 81445 LW is a front-loading washing machine that combines efficiency, functionality, and modern technology to cater to various laundry needs. With a capacity of 8 kg, this model is ideal for medium to large families, accommodating a significant amount of laundry in a single cycle.

One of the standout features of the Beko ECO WMB 81445 LW is its A+++ energy rating, which signifies its high energy efficiency. This machine is designed to reduce power consumption, making it an environmentally-friendly option for those looking to lower their carbon footprint. The inverter motor technology utilized in this model ensures a quieter washing experience while providing a longer lifespan and enhanced performance.

The large LCD display offers easy access and navigation through the different wash programs available. With 15 wash programs, including options for cotton, synthetic, and delicate fabrics, users can easily select the best setting for their laundry. The quick wash program is particularly useful for those in a hurry, efficiently cleaning lightly soiled garments in just 28 minutes.

Another notable technology is the Aqua Fusion system, which optimizes water and detergent use to prevent wastage. By ensuring that detergent is not diluted unnecessarily, it maximizes cleaning efficiency while saving resources. Additionally, the ProSmart Inverter motor is designed to reduce vibrations and noise, creating a more serene washing environment.

The Beko ECO WMB 81445 LW also features various practical options, such as the delay timer, which allows users to schedule their washes according to convenience. The child lock feature adds an extra layer of safety, preventing accidental adjustments by little hands. To top it all off, this washing machine is equipped with a self-cleaning detergent drawer, which maintains hygiene and cleanliness without extra effort.

In summary, the Beko ECO WMB 81445 LW washing machine combines user-friendly features, advanced technology, and energy-efficient performance, making it an excellent choice for families seeking reliability and convenience in their laundry routine.