Why doesn’t the washing machine
•This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations.
•The solution is to select a
If this failure is detected, C03 will appear on the display
Why can’t I see any water in the drum during the wash?
•This is due to the fact that the washing machine is provided with a system which is able to adapt to the load and type of fabrics, adjusting the levels of water and energy used, in order to preserve the environment.
So, although the water level you can see through the hatch may look low, there is no cause for concern as washing and rinsing efficiency will still be optimum.
Why is there still some water in the dispenser?
•This may be because the dispenser needs cleaning. This simple operation is described in Maintaining and cleaning the appliance. - Cleaning the detergent dispenser.
Why can’t I open the hatch immediately after the wash has finished?
•Washing machines today are provided with safety systems for users. One of them is that the washing machine cannot be opened until it is certain that the drum is quite still. This is why the hatch cannot be opened for 2 minutes.
Why doesn’t the remaining time shown on the clock coincide with the real time left until the selected cycle finishes?
•This time is for guidance purposes only and may be affected by the conditions under which the selected programme is being run, e.g. initial water temperature, size of load or unbalance caused by the garments during spin drying.
Other indications
•The washing machine can detect other indications. When this happens a number of other indicators appear on the display: F05, F06..., F10. If this happens, call the Official Technical Service.
21
EN