3Installation and assembly
Unpacking the washing machine
•Remove the base, corner protectors and top cover.
Unblocking the washing |
machine |
•Remove the screws holding the plastic covers to the back of the washing machine.
•Cover the holes with the plastic covers you have just removed.
C Do not throw the blocking screws away. You may need to move the washing machine at a later date.
Connection to the mains water supply
The water supply hose is inside the drum:
•Loosen and remove the 3 blocking screws.
•Connect the bent end of the hose to the threaded inlet of the electrovalve located at the rear of the washing machine.
6 | EN |