Blomberg WNF 9422 C20 Solution suggestions for problems, Cause Explanation / Suggestion

Page 13

6 Solution suggestions for problems

Cause

Explanation / Suggestion

Program cannot be started or selected.

Machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.).

Reset your machine by pressing “Start/ Pause/Cancel” button for 3 seconds. (see, Canceling a Program)

There is water coming from the bottom of the machine.

There might be problems with hoses or the pump filter.

Be sure the seals of the water inlet hoses are securely fitted.

Tightly attach the drain hose to the tap.

Make sure that the pump filter is completely closed.

Machine stopped shortly after the program started.

Machine can stop temporarily due to low voltage.

It will resume operating when the voltage is back to the normal level.

It continuously spins. Remaining time does not count down. (For models with a display)

There may be an imbalance of laundry in the machine.

The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.

The laundry in the drum may be clustered (bundled laundry in a bag). Laundry should be rearranged and re-spun.

No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.

It continuously washes. Remaining time does not count down. (For models with a display)

In the case of a paused countdown while taking •

The machine will wait until there is a sufficient

 

in water:

amount of water to avoid poor washing results due

Timer will not countdown until the machine is

to lack of water. Then the timer will start to count

 

filled with the correct amount of water.

down.

In the case of a paused countdown at the heating step:

Time will not count down until the selected temperature for the program is reached

 

The automatic spin correction system might have

 

 

been activated due to the unbalanced distribution

• In the case of a paused countdown at the

 

of the laundry in the drum.

The laundry in the drum may be clustered (bundled

spinning step:

 

laundry in a bag). Laundry should be rearranged

• There may be an imbalance of laundry in

 

 

and re-spun.

the machine.

 

No spinning is performed when the laundry is

 

 

 

not evenly distributed in the drum to prevent any

 

 

damage to the machine and to its environment.

 

 

 

There is foaming over the detergent drawer

 

 

• Too much detergent was used.

Mix 1 tablespoonful softener and ½ liter water and pour into the main wash compartment of the detergent drawer.

13 - EN

Image 13
Contents WNF 9422 C20 WNF 9402 C20 Safety instructions General SafetyFirst Use Intended useInstallation Initial preparations for washing Selecting a Program and Operating Your Machine Display symbols a Spin SymbolControl panel Hygiene Turning the machine onProgram selection Hand washSelf Clean Eco CleanEconomy Symbol Temperature selectionProgram and consumption table Auxiliary functions Child-proof lock Selecting or canceling an auxiliary function in pause modeEnd of program Draining any remaining water and cleaning the pump filter Maintenance and cleaningDetergent Drawer Inlet water filtersPage Cause Explanation / Suggestion Solution suggestions for problemsWNF 9422 C20 WNF 9402 C20 SpecificationsPage Warnhinweise Füße einstellen Transportstabilisatoren entfernenWasserzulauf anschließen Wasserablauf anschließenWäsche vorbereiten Vorbereitungen vor dem WaschenDie richtige Wäschemenge TürProgramm auswählen und mit der Maschine arbeiten AnzeigesymboleBedienfeld Maschine einschalten Eco Clean Öko-ReinProgrammauswahl HauptprogrammeEnergiesparsymbol Self Clean SelbstreinigenSpezialprogramme SpülenProgramm- und Verbrauchstabelle Zusatzfunktionen Türsperre Maschine in den Bereitschaftsmodus schaltenKindersicherung Waschprogramm abbrechenWaschmittelschublade Wartung und ReinigungWasserzulauffilter Restliches Wasser ablaufen lassen und Pumpenfilter reinigenPage Ursachen Erklärung / Vorschlag Lösungsvorschläge bei Problemen14’ Technische Daten