Blomberg WNF 9422 C20 user manual Eco Clean, Self Clean, Economy Symbol, Special programs, Rinse

Page 7

• Eco Clean

You can use this program, which is more sensitive to environment and natural resources, to wash lightly soiled and unspotted cotton laundry (max 3.5 kg) in a short time and economical way. It is suggested to use liquid or gel washing detergents.

• Self Clean

It is suggested to run this program with certain intervals (e.g. once in 1 or 2 months) for the self-cleaning of your machine. This program must certainly be run without any laundry in the machine. Make sure that the machine is empty before starting the program. For more effective cleaning, you can run the program by adding powder lime remover for washing machines into compartment II of the detergent drawer. After the program is completed, leave the door ajar to allow the inside of the machine get dry.

C This is not a program for washing laundry. This is a maintenance program for the machine.

C Never use this program if there is something in your machine.

C When this feature is started your machine senses the load inside of it automatically, if any, and interrupts the program.

Economy Symbol

Shows energy saving programs and temperature selections.

As "Intensive" and "Hygiene" programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up.

Special programs

For specific applications, select any of the following programs:

• Rinse

This program is used when you want to rinse or starch separately.

• Spin + Drain

This program spins with maximum possible rpm in the default setting after the water drains from the machine.

C Use a lower spin speed for delicate laundries.

Temperature selection

Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator.

To change the temperature, press the temperature button. Temperature decreases in 10° increments.

Cold selection is shown with “-” symbol.

 

Normally soiled, white cottons and

90˚C

linens. (Ex.: coffee table covers,

 

tablecloths, towels, bed sheets)

 

Normally soiled, fade proof colored

 

linens, cottons or synthetic clothes

60˚C

(Ex.: shirts, nightgowns, pajamas)

 

and lightly soiled white linen clothes

 

(Ex.: underwear)

40˚C

Blended clothes including

synthetics and woolens as well as

30˚C Cold

delicates.

 

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.

To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no spin is

shown with “” symbols.

If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:

-Adjust the spin speed.

-Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

7 - EN

Image 7
Contents WNF 9422 C20 WNF 9402 C20 Intended use General SafetySafety instructions First UseInstallation Initial preparations for washing Selecting a Program and Operating Your Machine Display symbols a Spin SymbolControl panel Hand wash Turning the machine onHygiene Program selectionTemperature selection Eco CleanSelf Clean Economy SymbolProgram and consumption table Auxiliary functions Child-proof lock Selecting or canceling an auxiliary function in pause modeEnd of program Inlet water filters Maintenance and cleaningDraining any remaining water and cleaning the pump filter Detergent DrawerPage Cause Explanation / Suggestion Solution suggestions for problemsWNF 9422 C20 WNF 9402 C20 SpecificationsPage Warnhinweise Wasserablauf anschließen Transportstabilisatoren entfernenFüße einstellen Wasserzulauf anschließenTür Vorbereitungen vor dem WaschenWäsche vorbereiten Die richtige WäschemengeProgramm auswählen und mit der Maschine arbeiten AnzeigesymboleBedienfeld Hauptprogramme Eco Clean Öko-ReinMaschine einschalten ProgrammauswahlSpülen Self Clean SelbstreinigenEnergiesparsymbol SpezialprogrammeProgramm- und Verbrauchstabelle Zusatzfunktionen Waschprogramm abbrechen Maschine in den Bereitschaftsmodus schaltenTürsperre KindersicherungRestliches Wasser ablaufen lassen und Pumpenfilter reinigen Wartung und ReinigungWaschmittelschublade WasserzulauffilterPage Ursachen Erklärung / Vorschlag Lösungsvorschläge bei Problemen14’ Technische Daten