Bosch Appliances 24202UC Remove the transport bolts, Water connections, Damage to the Appliance

Page 12

Remove the transport bolts

9CAUTION

DAMAGE TO THE APPLIANCE

▯The machine is secured for transport with transport bolts.

Transport bolts that are not removed can damage the drum during operation of the machine, the washer will vibrate, and it will be much noisier during spin cycles if the transport bolts are not removed before use.

Be sure to remove all 4 transport bolts completely before first use. Keep the transport bolts.

If a pedestal was purchased with the washer, it must be installed first, prior to removing the transport bolts. Please consult the pedestal installation instructions.

▯In order to prevent transport damage during later transport, be sure to re-install the bolts before transport.

1.Remove hoses from the brackets.

2.Loosen and remove all 4 transport bolts.

Remove the sleeves. Take the power cable out of the brackets.

3.Place covers over the transport bolt holes

Four plastic covers are provided in the small parts bag included with your washer. Separate these covers and install one in each hole where the transport bolts were removed.

Lock covers firmly by pressing on the snap hook. Insert hose holder. Secure hoses in the hose holders.

NOTICE: Keep the assemblies together and store them for later use such as when moving the washer.

Water connections

Water supply hose connections

NOTICES

▯The washing machine must only be operated with cold and hot (max. 140 °F/60 °C) tap water. Do not connect the appliance to the mixer tap of a pressurized hot-water boiler.

▯To prevent water damage, the hot and cold water valves should be accessible when the washing machine is in place and should always be turned off when the washing machine is not in use.

▯If installing the washing machine in a new building or a building in which the plumbing system was recently installed or upgraded, flush the lines before installing the washing machine to remove any sand, dirt or residue.

▯To prevent leakage or water damage, follow the instruction in this chapter.

▯If in doubt, have the appliance connected by a technican.

Connect your washer to the wall faucets using the included AquaShield water supply hose.

Observe each of the following:

▯Only use the new water supply hose shipped with your washer. Never connect old used hoses.

▯The water supply hoses must not be kinked, bent or flattened in such a way as to potentially diminish water flow.

▯The water supply pressure must be between 14,5 to 145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons (8 liters) of flow per minute. A pressure regulator valve must be installed if the maximum water pressure is exceeded.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Washer Welcome to Your New Washer Table of contents Customer service ~ TroubleshootingImportant information Purchase informationImportance and meaning of symbols Your washing machine is intended forImportant Safety Instructions ~ Electrical connectionSpecial features Standard features and helpful informationIntroduction to your new washer Dimensions and clearances required Length of power cord and water supply hosesInstallation types Appliance dimensionsVent spacing actual not minimum dimensions Minimum opening dimensionsClearance requirements Minimum Ventilation area MinimumInstallation instructions Tools neededIntroduction Waste disposalSet up on a pedestal with drawer Installation checklistImportance of installing on a solid, level Parts provided with your washerRemove the transport bolts Water connectionsDamage to the Appliance Water supply hose connectionsWater drain hose connection Height of drain pointTypes of drainage hookups Standpipe Leveling the washer Electrical connectionTransporting the washer Temp. selection, Spin Speed, Delay-Start Getting to know your applianceDisplay field Control panelLaundry Sorting the LaundryIdentifying and treating stains Preparing the laundryLaundry detergents and additives Adding the correct amount of HE detergentCycle selection table Starching Dyeing/bleachingSoaking Default cycle settings Additional program settingsOperating Instructions ~ Standard features and helpful information Filling the detergent and additives compartmentsRecommended Load Size FillingPausing/Continuing the cycle Cancel cycleRemoving laundry/switching the appliance off Starting the cycleSignal Activate adjustment mode for the signal volumeSetting volume for button signals depending on the model Setting volume for indicator signalsCleaning and maintenance Cleaning the drain pump Clean the strainers at the water tap end of the hoseClean the strainers at the washer end of the hose Risk of ScaldingPage Troubleshooting Troubleshooting~ Cleaning the drain pump Emergency door lock releaseDeterming the Problem Problem Possible causes Solutions~ Emergency door lock release ~ Remove the transport bolts Customer service Error messagesDisplay MeasureStatement of Limited Product Warranty Bosch Clothes WasherScope of Warranty Page 9000826649

24202UC specifications

The Bosch Appliances 24202UC is a milestone in kitchen innovation, embodying a blend of style, functionality, and advanced technology that elevates culinary experiences. This undercounter drawer dishwasher is designed to fit seamlessly into any kitchen layout while providing exceptional cleaning performance.

One of the main features of the 24202UC is its flexible loading capacity. Its unique drawer design allows users to load large pots and pans or delicate glassware with ease, providing two independent washing compartments that can accommodate different types of dishes simultaneously. This feature is particularly beneficial for households that frequently entertain guests or those that have varied cleaning needs.

The 24202UC employs Bosch’s renowned PrecisionWash technology, which uses intelligent sensors to determine the best wash cycle for each load. This means that you can trust the dishwasher to deliver optimal cleaning results without wasting water or energy. The targeted spray arms ensure that every dish is thoroughly cleaned, eliminating the worry of leftovers being left behind.

In terms of energy efficiency, this model stands out with its ENERGY STAR certification. Bosch is committed to eco-friendly practices, and the 24202UC uses less water and energy without sacrificing performance. It operates quietly as well, with a sound level of only 44 dBA, making it a great fit for open-concept living spaces where noise is a concern.

Another defining characteristic is the customizable wash cycles. The 24202UC offers various wash options, including Eco, Heavy, and Speed, allowing users to choose the perfect setting based on their needs. The built-in delay start feature allows for up to 24 hours of scheduling, providing flexibility for busy households.

The sleek stainless steel finish gives it a modern aesthetic that complements any kitchen decor. The easy-to-use controls, along with a clear interior LED light, make loading and unloading a breeze. Bosch also prioritizes durability, as the stainless steel tub resists staining and maintains its appearance even after years of use.

In summary, the Bosch Appliances 24202UC combines advanced technologies with thoughtful design, making it an excellent addition to any kitchen. With its efficient cleaning capabilities, flexible loading, and energy-saving features, it sets a new standard in home dishwashing solutions.
Top Page Image Contents