Bosch Appliances 24202UC manual Transporting the washer

Page 15

Grounding Instructions

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Important Points

▯Do not modify the plug provided with the appliance. If the plug will not fit into the outlet have a properly grounded outlet installed by a qualified electrician. Do not cut, remove or bypass the grounding prong on the washer power cord plug.

▯The washer power cord plug must be easily accessible when the washer is operating.

▯When unplugging or plugging in the washer power cord, grasp the plug. Do not pull on the power cord to unplug the washer.

▯The household electrical supply must be suitable for the voltage specification shown on the washer rating plate (located inside the washer door, immediately below the drum opening).

~ Purchase information; Page 4

See the table below for connection specfications and fuse/breaker requirements.

Volts

Hertz

Ampers

Watts

 

 

 

 

208 - 240

60

12

2.880 max.

▯The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a Ground Fault Circuit Interrupter (GFCI) is recommended.

▯Protect the power cord from physical damage, such as being twisted, kinked, pinched, caught in a door, or walked upon.

▯If the power cord is damaged, it must be replaced by a qualified person to avoid a fire/shock hazard. Replacement power cords are available through Customer Service.

~ Customer service; Page 4

▯The washing machine must only be connected to an individual branch circuit via a socket which has been properly installed and grounded.

▯Make sure that:

- the power plug fits into the socket - the wire size is sufficient

- the grounding system is properly installed:

▯The power cord may be replaced by an electrican only. Replacement power cords are available from Customer Service. To reduce the risk of fire or electrical shock, DO NOT use an extension cord or an adapter to connect the washing machine to the power supply. If a ground fault circuit breaker is to be used, only use the types marked with the following symbol: z. Only this symbol can guarantee compliance with all current regulations.

Transporting the washer

Before transporting the washer

1.Disconnect the washer power cord from the wall outlet.

2.Turn off the water supply to the washer.

3.Disconnect water supply lines from the tap.

4.Disconnect the drain hose from the drain location.

5.Install the transport bolt assemblies as shown below.

Remove the transport bolt hole covers

1.Remove all four transport bolt hole covers.

2.Pull the tip of the arrow on the cover out slightly to disengage the locking tab.

3.Rotate the cover counterclockwise to remove. Repeat for all 4 transport bolt hole covers.

Insert the transport bolt assemblies

1.Each assembly consists of a plastic bushing and a bolt that extends through the bushings. Unscrew the bolt until the threaded end is flush with the end of the plastic bushing.

2.Insert the transportation bolt and bushing assembly as shown. The metal housing slides around the bolt through the slot in the plastic bushing as the bushing is slid into place. The open part of the bushing slot should be facing the direction shown to allow the assembly to slide fully into place.

3.When the bolt is in place screw it in until the bolt threads engage the drum. Double check and ensure bolts are screwed into threaded holes and not into adjecent cracks or crevices. Repeat the process for all 4 transportation bolt assemblies before tightening any all the way. Complete tightening all 4 bolt assemblies until they are each snug in place.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Washer Welcome to Your New Washer Table of contents Purchase information Customer service~ Troubleshooting Important informationYour washing machine is intended for Importance and meaning of symbols~ Electrical connection Important Safety InstructionsSpecial features Standard features and helpful informationIntroduction to your new washer Appliance dimensions Dimensions and clearances requiredLength of power cord and water supply hoses Installation typesVentilation area Minimum Vent spacing actual not minimum dimensionsMinimum opening dimensions Clearance requirements MinimumWaste disposal Installation instructionsTools needed IntroductionParts provided with your washer Set up on a pedestal with drawerInstallation checklist Importance of installing on a solid, levelWater supply hose connections Remove the transport boltsWater connections Damage to the ApplianceWater drain hose connection Height of drain pointTypes of drainage hookups Standpipe Electrical connection Leveling the washerTransporting the washer Control panel Temp. selection, Spin Speed, Delay-StartGetting to know your appliance Display fieldPreparing the laundry LaundrySorting the Laundry Identifying and treating stainsAdding the correct amount of HE detergent Laundry detergents and additivesCycle selection table Starching Dyeing/bleachingSoaking Additional program settings Default cycle settingsOperating Instructions Filling ~ Standard features and helpful informationFilling the detergent and additives compartments Recommended Load SizeStarting the cycle Pausing/Continuing the cycleCancel cycle Removing laundry/switching the appliance offSetting volume for indicator signals SignalActivate adjustment mode for the signal volume Setting volume for button signals depending on the modelCleaning and maintenance Risk of Scalding Cleaning the drain pumpClean the strainers at the water tap end of the hose Clean the strainers at the washer end of the hosePage Emergency door lock release TroubleshootingTroubleshooting ~ Cleaning the drain pumpDeterming the Problem Problem Possible causes Solutions~ Emergency door lock release ~ Remove the transport bolts Measure Customer serviceError messages DisplayBosch Clothes Washer Statement of Limited Product WarrantyScope of Warranty Page 9000826649

24202UC specifications

The Bosch Appliances 24202UC is a milestone in kitchen innovation, embodying a blend of style, functionality, and advanced technology that elevates culinary experiences. This undercounter drawer dishwasher is designed to fit seamlessly into any kitchen layout while providing exceptional cleaning performance.

One of the main features of the 24202UC is its flexible loading capacity. Its unique drawer design allows users to load large pots and pans or delicate glassware with ease, providing two independent washing compartments that can accommodate different types of dishes simultaneously. This feature is particularly beneficial for households that frequently entertain guests or those that have varied cleaning needs.

The 24202UC employs Bosch’s renowned PrecisionWash technology, which uses intelligent sensors to determine the best wash cycle for each load. This means that you can trust the dishwasher to deliver optimal cleaning results without wasting water or energy. The targeted spray arms ensure that every dish is thoroughly cleaned, eliminating the worry of leftovers being left behind.

In terms of energy efficiency, this model stands out with its ENERGY STAR certification. Bosch is committed to eco-friendly practices, and the 24202UC uses less water and energy without sacrificing performance. It operates quietly as well, with a sound level of only 44 dBA, making it a great fit for open-concept living spaces where noise is a concern.

Another defining characteristic is the customizable wash cycles. The 24202UC offers various wash options, including Eco, Heavy, and Speed, allowing users to choose the perfect setting based on their needs. The built-in delay start feature allows for up to 24 hours of scheduling, providing flexibility for busy households.

The sleek stainless steel finish gives it a modern aesthetic that complements any kitchen decor. The easy-to-use controls, along with a clear interior LED light, make loading and unloading a breeze. Bosch also prioritizes durability, as the stainless steel tub resists staining and maintains its appearance even after years of use.

In summary, the Bosch Appliances 24202UC combines advanced technologies with thoughtful design, making it an excellent addition to any kitchen. With its efficient cleaning capabilities, flexible loading, and energy-saving features, it sets a new standard in home dishwashing solutions.
Top Page Image Contents