Blomberg WNF 8406A user manual Door lock, Child-proof lock

Page 10

temperature data reappear.

Switching the machine to standby mode The machine is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily. The Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out.

Selecting or canceling an auxiliary function in pause mode

Auxiliary functions can be cancelled or selected in accordance with the step the program is at.

Adding/removing laundry in pause mode The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door.

Door lock

The Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out.

Child-proof lock

Protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program.

C Your machine can be turned on and off with On/Off button while the child-proof lock is activated. In this case, your machine will resume its program with child-proof lock activated.

The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child-proof lock is activated) label appears on the display.

The same symbol will also be displayed whenever any button is pressed while the machine is child-locked.

To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec.

“C:OFF” (Child-proof lock is deactivated) label appears on the screen.

Ending the program through canceling “Start/Pause/Cancel” button (Figure 2-10) is pressed for 3 seconds to cancel the program. Start symbol (Figure 3-7j) will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen.

End of program

When the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start-up of the program will remain selected. “End” will appear on the display.

10 - EN

Image 10
Contents WNF 8406 a First Use General SafetySafety instructions Intended useInstallation Correct load capacity Initial preparations for washingPreparing clothes for washing Loading doorSelecting a Program and Operating Your Machine Display symbols a Spin SymbolControl panel Program selection Economy SymbolTurning the machine on Main programsSpin + Drain Temperature selectionRinse Spin Speed selectionProgram and consumption table Auxiliary functions Door lock Child-proof lockDetergent Drawer Maintenance and cleaningDraining any remaining water and cleaning the pump filter Inlet water filtersPage Solution suggestions for problems Cause Explanation / SuggestionSpecifications 14’Page Warnhinweise Wasserzulauf anschließen Transportstabilisatoren entfernenFüße einstellen Wasserablauf anschließenWaschmittel und Weichspüler Vorbereitungen vor dem WaschenTür Wäsche vorbereitenBedienfeld AnzeigesymboleProgramm auswählen und mit der Maschine arbeiten AbbildungProgrammauswahl EnergiesparsymbolMaschine einschalten HauptprogrammeSchleudern + Abpumpen SpülenTemperaturauswahl Programm- und Verbrauchstabelle Schnellwäschen Zusatzfunktionen Auswahl vonVorwäsche Spülen PlusKindersicherung Maschine in den Bereitschaftsmodus schaltenTürsperre Waschprogramm abbrechenWasserzulauffilter Wartung und ReinigungWaschmittelschublade Restliches Wasser ablaufen lassen und Pumpenfilter reinigenPage Lösungsvorschläge bei Problemen Ursachen Erklärung / VorschlagTechnische Daten