Blomberg WMF 8428 A user manual General Safety, First Use, Intended use, Safety instructions

Page 2

1 Warnings

General Safety

Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

If the power cable or mains plug is damaged you must call Authorized Service for repair.

Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

Your washing machine is designed to continue operating in the event of a power interruption. Your machine will not resume its program when the power restores. To cancel the program, you may switch the program selection knob to any position other than the current program. (see, Ending the program through canceling)

There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

Some problems you may encounter may be caused by the infrastructure. Press “Start/Pause/Cancel” button for 3 seconds to cancel the program set in your machine before calling the authorized service.

First Use

Carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” program.

Ensure that the cold and hot water connections are made correctly when installing your machine.

If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker.

While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding.

Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives.

Intended use

This product has been designed for home use.

The appliance may only be used for washing and rinsing of textiles that are marked accordingly.

Safety instructions

This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity.

The supply and draining hoses must always be securely fastened and remain in an undamaged state.

Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!

Never open the loading door or remove the filter while there is still water in the drum.

Unplug the machine when it is not in use.

Never wash down the appliance with a water hose! There is the risk of electric shock!

Never touch the plug with wet hands. Do not operate the machine if the power cord or plug is damaged.

For malfunctions that cannot be solved by information in the operating manual:

Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent. You may refer to your local agent or solid waste collection center in your municipality to learn how to dispose of your machine.

If there are children in your

house...

Keep children away from the machine when it is operating. Do not let them tamper with the machine.

Close the loading door when you leave the area where the machine is located.

2 - EN

Image 2
Contents WNF 8428 a First Use General SafetySafety instructions Intended useConnecting to the drain InstallationAdjusting the feet Connecting to the water supplyInitial preparations for washing Control panel Display symbolsSelecting a Program and Operating Your Machine Main programs Turning the machine onProgram selection CottonsViscose Fashioncare Economy SymbolTemperature selection DuvetProgram and consumption table Auxiliary functions Child-proof lock Changing the selections after the program has startedDoor lock Detergent Drawer Maintenance and cleaningDraining any remaining water and cleaning the pump filter Inlet water filtersPage Solution suggestions for problems Cause Explanation / SuggestionSpecifications WNF 8428 aPage Warnhinweise Wasserzulauf anschließen Transportstabilisatoren entfernenFüße einstellen Wasserablauf anschließenWaschmittel und Weichspüler Vorbereitungen vor dem WaschenTür Wäsche vorbereitenBedienfeld AnzeigesymboleProgramm auswählen und mit der Maschine arbeiten AbbildungHauptprogramme Maschine einschaltenProgrammauswahl Koch-/BuntwäscheBettdecken EnergiesparsymbolViscose Modekleidung SpecialprogrammerProgramm- und Verbrauchstabelle Zusatzfunktion ProgrammZusatzfunktionen Türsperre Programm startenMaschine in den Bereitschaftsmodus schalten KindersicherungWasserzulauffilter Wartung und ReinigungWaschmittelschublade Restliches Wasser ablaufen lassen und Pumpenfilter reinigenPage Lösungsvorschläge bei Problemen Ursachen Erklärung / VorschlagTechnische Daten