John Lewis 1609 instruction manual Emergency emptying out

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

●

●

●

●

●

Pull out the plug from the power socket;

Close the water tap;

If necessary, wait until the water has cooled down;

Open the pump door using a suitable tool;

Place a bowl with a small edge close to the pump to collect any spillage. Remove the emergency emptying cap from the filter cover. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on filter cover. Empty the bowl. Repeat the procedure until water stops flowing out;

●

●

Clean the pump if necessary as previously described;

Replace the filter into the pump and screw it firmly as previously described;

●Replace the emergency emptying cap into the filter cover and close the pump door.

28