e. | 11. Improper laundering of flame retardant finishes could |
| remove them. Therefore, follow garment manu- |
| facturer's instructions carefully. |
| 12. When moving, havethe washer checkedand properly |
| installed by a qualified |
6.Do not reach intothe applianceifthe tuboragitatoris moving.The washerisequippedwitha safetyswitch foryourprotection. If actiondoes notstopwhenthe washerlidis openedduringthe Spin Cycle, discon- nect the electrical power to the washer. Do not
operatethe washer untilit has been repairedby an
7.Do nottamperwiththe controls,
8.Do notrepairor replaceany part of the applianceor attemptany servicingto preventpersonalinjuryand damage to the washer.
9.Observe these precautionswhen using cleaning fluids,spot or stain removers,etc.:
a.Use only accordingto the manufacturer'sdirec- tionsas statedon the labelor carton.
b.Use outdoorsor in a well ventilatedarea.
c.Use
d. After usingthese removers,thoroughlyrinsethe clothes by hand before they are placed in the washer. Some of these removers- for example:
rustremover- will damage the componentsand the finishof the washer.
10. Do not wash fiberglassarticles unless label states they are machinewashable. Mostfiberglassarticles
shed small particles of glass that will not readily rinse
out of the washer. These particles mayget on clothing in later loads and cause skin irritation and discomfort.
Be sure to rinse the washer thoroughly before using it again.
SAVE THESE INSTRUCTIONS
Applianceswith the UL symbolon the data plate have been listedwith Underwriters'Laboratories,Inc. Those with a CSA Monogram on the data plate have been
certifiedby the CSA TestingLaboratoriesas complying withCanadianStandardsAssociationrequirements.Nev- ertheless,as with any equipmentusing electricityand
havingmovingparts, thereare potentialhazards. To use thisappliancesafely,the operatorshouldbecomefamil-
iar withthe instructionsforoperationofthe Applianceand always exercise care while usingit.