Check the following list to be sure a service call is really necessary.
If the water won't drain:
•Isthe hose kinkedor knotted?
•ts the drain outletclogged?
If the washer does not fill:
•ts the electricat cord plugged in correctly?
•Has a fuse blown or is the circuit breaker tripped?
•Have the controlsbeen properlyset?
•ts the PauseIndicatorlit? If so, touch the START/PAUSE Pad,
•Turn off, let stand for 30 minutes then restarL Motor thermal protector may have engaged.
•Are the hot and cold water faucets turned on?
•Are the hoses kinked or knotted?
•Are the hose filters clogged?
if water is leaking:
•Are the hose connectionstight at the faucets?
•Is the end of the drainhose correctlyinserted in and securedto the drainfacility?
If the water temperature is incorrect:
•Is the WATER TEMP. SELECTION set correctly?
•Are the hoses connected to the correct faucets (hot to hot, cold to cold)?
•Are the hot and cold faucets turned on?
•Is the water heater set correctly?
If the washer does not spin:
•is the lid closed?
•Is the electrical cord pLuggedin correctly?
•Has a fuse blown or isthe circuit breaker tripped?
If the washer is noisy:
•Is the washer level and firm to the floor?
•is the load unbalanced? (Excessive vibration can occur when a load becomes unbalanced.)
If a power failure occurs during a cycle:
•Restartand use SPIN ONLY to drain the washer. Then, start a newcycle.
21