SPIN TROUBLE
Check on the spinning, is the frequency of the water level 248 or more. The frequency can be
checked by pressing the Wash and Rinse buttons at NO the same time on the program.
YES
When pressing Rinse, Spin and POWER buttons at
the same time after power off, press the Start/Pause YES button 1 times, is the drum low speed spin?
NO
Check the S.PRESSURE SWITCH ASSEMBLY or HOSE (Pressure). If the problem is on the
S.PRESSURE SWITCH ASSEMBLY or the HOSE, replace the S.PRESSURE SWITCH ASSEMBLY or the HOSE.
Normal
(1) |
Is it disconnected, or disassembled? [Red:3pin(1), GY:4pin(2)]
NO
Check the motor connector, is the resistance of the terminal same as the figure?
MOTOR TERMINAL (1)
① ② ③
Resistance of terminal:
①~② / ②~③ / ③~① : About 5Ω~15Ω
YES
Replace the MAIN PWB ASSEMBLY
YES
NO
Correct the connector.
Replace the STATOR ASSEMBLY
Does the spring of Latch Hook actuate?
Is there clicking sound once or twice when the START/PAUSE button is pressed to start the cycle?
Is DOOR SWITCH ASSEMBLY broken?
24
Replace Door Assembly.
Check the DOOR SWITCH ASSEMBLY Connector and
MAIN PWB ASSEMBLY (Red 3 pin, Yellow 4 pin and white 3 pin connector (1)).
Replace the DOOR SWITCH ASSEMBLY.