LG Electronics F1443KDS Outlet, Loose, Reset circuit breaker or replace, Occurred, Door does not

T roubleshooting guide

Symptom	Possible Cause	Solution
Washer does not	• Electrical power cord may not be	Make sure plug fits tightly in wall
start	plugged in or connection may be	outlet.
	loose.
	• House fuse blown, circuit breaker	Reset circuit breaker or replace
	tripped,or a power outage has	fuse. Do not increase fuse capacity.
	occurred.	If problem is a circuit overload, have
		it corrected by a qualified electrician.
	• Water supply tap is not turned on.	Turn on water supply tap.
Washer will not	• Check that the door is firmly shut.	Close the door and press the
spin		Start/Pause button. After pressing
		the Start/Pause button, it may take a
		few moments before the washer
		begins to spin. The door must be
		locked before spin can be achieved.
		Add 1 or 2 similar items to help
		balance the load. Rearrange load to
		allow proper spinning.
Door does not		Once machine has started, the door
open		cannot be opened for safety
		reasons. Check if the "Door Lock"
		icon is illuminated. You can safely
		open the door after the "Door Lock"
		icon turns off.
Wash cycle time		The washing time may vary by the
delayed		amount of laundry, water
		pressure, water temperature and
		other usage conditions.
		If an imbalance is detected or if the
		suds removing programme is on, the
		wash time shall be increased.
Fabric softener	Too much softener may cause an	Follow softener guidelines to ensure
overflow	overflow.	appropriate amount is used.
		Do not exceed the maximum fill line
Softeners		Close the dispenser drawer slowly.
dispensed		Do not open the drawer during the
too early		wash cycle.

31